411 lines
11 KiB
C
411 lines
11 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file usart.c
|
|
* @brief This file provides code for the configuration
|
|
* of the USART instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2025 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "usart.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
UART_HandleTypeDef huart4;
|
|
UART_HandleTypeDef huart5;
|
|
UART_HandleTypeDef huart1;
|
|
UART_HandleTypeDef huart2;
|
|
UART_HandleTypeDef huart3;
|
|
|
|
/* UART4 init function */
|
|
void MX_UART4_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN UART4_Init 0 */
|
|
|
|
/* USER CODE END UART4_Init 0 */
|
|
|
|
/* USER CODE BEGIN UART4_Init 1 */
|
|
|
|
/* USER CODE END UART4_Init 1 */
|
|
huart4.Instance = UART4;
|
|
huart4.Init.BaudRate = 115200;
|
|
huart4.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart4.Init.StopBits = UART_STOPBITS_1;
|
|
huart4.Init.Parity = UART_PARITY_NONE;
|
|
huart4.Init.Mode = UART_MODE_TX_RX;
|
|
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&huart4) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN UART4_Init 2 */
|
|
|
|
/* USER CODE END UART4_Init 2 */
|
|
|
|
}
|
|
/* UART5 init function */
|
|
void MX_UART5_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN UART5_Init 0 */
|
|
|
|
/* USER CODE END UART5_Init 0 */
|
|
|
|
/* USER CODE BEGIN UART5_Init 1 */
|
|
|
|
/* USER CODE END UART5_Init 1 */
|
|
huart5.Instance = UART5;
|
|
huart5.Init.BaudRate = 115200;
|
|
huart5.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart5.Init.StopBits = UART_STOPBITS_1;
|
|
huart5.Init.Parity = UART_PARITY_NONE;
|
|
huart5.Init.Mode = UART_MODE_TX_RX;
|
|
huart5.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart5.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&huart5) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN UART5_Init 2 */
|
|
|
|
/* USER CODE END UART5_Init 2 */
|
|
|
|
}
|
|
/* USART1 init function */
|
|
|
|
void MX_USART1_UART_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN USART1_Init 0 */
|
|
|
|
/* USER CODE END USART1_Init 0 */
|
|
|
|
/* USER CODE BEGIN USART1_Init 1 */
|
|
|
|
/* USER CODE END USART1_Init 1 */
|
|
huart1.Instance = USART1;
|
|
huart1.Init.BaudRate = 115200;
|
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
|
huart1.Init.Parity = UART_PARITY_NONE;
|
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN USART1_Init 2 */
|
|
|
|
/* USER CODE END USART1_Init 2 */
|
|
|
|
}
|
|
/* USART2 init function */
|
|
|
|
void MX_USART2_UART_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN USART2_Init 0 */
|
|
|
|
/* USER CODE END USART2_Init 0 */
|
|
|
|
/* USER CODE BEGIN USART2_Init 1 */
|
|
|
|
/* USER CODE END USART2_Init 1 */
|
|
huart2.Instance = USART2;
|
|
huart2.Init.BaudRate = 115200;
|
|
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart2.Init.StopBits = UART_STOPBITS_1;
|
|
huart2.Init.Parity = UART_PARITY_NONE;
|
|
huart2.Init.Mode = UART_MODE_TX_RX;
|
|
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&huart2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN USART2_Init 2 */
|
|
|
|
/* USER CODE END USART2_Init 2 */
|
|
|
|
}
|
|
/* USART3 init function */
|
|
|
|
void MX_USART3_UART_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN USART3_Init 0 */
|
|
|
|
/* USER CODE END USART3_Init 0 */
|
|
|
|
/* USER CODE BEGIN USART3_Init 1 */
|
|
|
|
/* USER CODE END USART3_Init 1 */
|
|
huart3.Instance = USART3;
|
|
huart3.Init.BaudRate = 115200;
|
|
huart3.Init.WordLength = UART_WORDLENGTH_8B;
|
|
huart3.Init.StopBits = UART_STOPBITS_1;
|
|
huart3.Init.Parity = UART_PARITY_NONE;
|
|
huart3.Init.Mode = UART_MODE_TX_RX;
|
|
huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
huart3.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&huart3) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN USART3_Init 2 */
|
|
|
|
/* USER CODE END USART3_Init 2 */
|
|
|
|
}
|
|
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(uartHandle->Instance==UART4)
|
|
{
|
|
/* USER CODE BEGIN UART4_MspInit 0 */
|
|
|
|
/* USER CODE END UART4_MspInit 0 */
|
|
/* UART4 clock enable */
|
|
__HAL_RCC_UART4_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**UART4 GPIO Configuration
|
|
PA0-WKUP ------> UART4_TX
|
|
PA1 ------> UART4_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN UART4_MspInit 1 */
|
|
|
|
/* USER CODE END UART4_MspInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==UART5)
|
|
{
|
|
/* USER CODE BEGIN UART5_MspInit 0 */
|
|
|
|
/* USER CODE END UART5_MspInit 0 */
|
|
/* UART5 clock enable */
|
|
__HAL_RCC_UART5_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
/**UART5 GPIO Configuration
|
|
PC12 ------> UART5_TX
|
|
PD2 ------> UART5_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_UART5;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_UART5;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN UART5_MspInit 1 */
|
|
|
|
/* USER CODE END UART5_MspInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/* USART1 clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
|
|
/* USER CODE END USART1_MspInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/* USART2 clock enable */
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
|
|
/* USER CODE END USART2_MspInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* USART3 clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
/**USART3 GPIO Configuration
|
|
PC10 ------> USART3_TX
|
|
PC11 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
|
{
|
|
|
|
if(uartHandle->Instance==UART4)
|
|
{
|
|
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
|
|
|
/* USER CODE END UART4_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_UART4_CLK_DISABLE();
|
|
|
|
/**UART4 GPIO Configuration
|
|
PA0-WKUP ------> UART4_TX
|
|
PA1 ------> UART4_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1);
|
|
|
|
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
|
|
|
/* USER CODE END UART4_MspDeInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==UART5)
|
|
{
|
|
/* USER CODE BEGIN UART5_MspDeInit 0 */
|
|
|
|
/* USER CODE END UART5_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_UART5_CLK_DISABLE();
|
|
|
|
/**UART5 GPIO Configuration
|
|
PC12 ------> UART5_TX
|
|
PD2 ------> UART5_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12);
|
|
|
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
|
|
|
|
/* USER CODE BEGIN UART5_MspDeInit 1 */
|
|
|
|
/* USER CODE END UART5_MspDeInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
|
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
|
}
|
|
else if(uartHandle->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PC10 ------> USART3_TX
|
|
PC11 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|