USB; Coupling Caps; and XTAL schematic

hardware/Type-C.pretty-master/README.md

@@ -0,0 +1,29 @@
+# Type-C.pretty
+KiCad library for various Type-C USB connectors
+
+Currently included connectors:
+
+[Wurth 632723300011](https://www.digikey.com/product-detail/en/wurth-electronics-inc/632723300011/732-9618-1-ND/5806673)
+
+- 1.6mm PCB compatibility
+- Through-hole secondary pins; theoretically fully hand-solderable
+- Most expensive of the three
+
+[HRO TYPE-C-31-M-12](https://lcsc.com/product-detail/USB-Type-C_TYPE-C-31-M-12-Female-16P-SMD_C165948.html)
+
+- Extremely cheap
+- Simplified design with only one row; hand-solderable
+- Legs do not extend long enough to "officially" support 1.6mm PCBs (Can be soldered in, but legs will be shorter than PCB)
+
+[Amphenol 12401598E4#2A](https://www.digikey.com/product-detail/en/amphenol-commercial-products/12401598E4-2A/12401598E4-2ACT-ND/6051824)
+
+- 1.6mm PCB compatibility
+- Half the cost of the Wurth connector
+- Requires reflow station or similar to solder full set of SMT pins below barrel
+
+[GCT USB4085-GF-A](https://www.digikey.com/product-detail/en/gct/USB4085-GF-A/2073-USB4085-GF-ACT-ND/9859733)
+
+- Only pins for USB 2.0
+- All pins are through hole and are hand solderable
+- Data pins barely break the surface of 1.6mm PCB
+- Half the cost of the Amphenol