kim/modular-kbd
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'dev'

Browse Source
This commit is contained in:
Oliver "Kim" Avecilla Cabral
2025-07-15 09:09:22 -07:00
parent caa7babd91 d47641e164
commit 86e27feb0d
236 changed files with 6682 additions and 4609 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
firmware/components/CAN/MainCAN/.gitignore vendored
View File

@@ -1,5 +0,0 @@
.pio
.vscode/.browse.c_cpp.db*
.vscode/c_cpp_properties.json
.vscode/launch.json
.vscode/ipch

11
firmware/components/CAN/MainCAN/platformio.ini
View File

@@ -1,11 +0,0 @@
[env:bluepill_F103C8]
platform = ststm32
board = genericSTM32F103C8
framework = stm32cube
upload_protocol = stlink
upload_flags = -c CPUTAPID 0x2ba01477
build_src_filter = +<*> .<EWARM>
build_flags =
-Isrc/Core/Inc
-Isrc/USB_DEVICE/App
-Isrc/USB_DEVICE/Target

37
firmware/components/CAN/MainCAN/src/.mxproject
View File

File diff suppressed because one or more lines are too long

154
firmware/components/CAN/MainCAN/src/Core/Src/main.c
View File

@@ -1,154 +0,0 @@
#include "main.h"
#include "usb_device.h"
CAN_HandleTypeDef hcan;
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
int main(void)
{
HAL_Init();
SystemClock_Config();
MX_GPIO_Init();
MX_CAN_Init();
MX_USB_DEVICE_Init();
while (1)
{
uint8_t buf[] = "USB Serial Test!";
HAL_Delay(1000);
HAL_GPIO_TogglePin(GPIOC, GPIO_PIN_13);
}
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief CAN Initialization Function
* @param None
* @retval None
*/
static void MX_CAN_Init(void)
{
/* USER CODE BEGIN CAN_Init 0 */
/* USER CODE END CAN_Init 0 */
/* USER CODE BEGIN CAN_Init 1 */
/* USER CODE END CAN_Init 1 */
hcan.Instance = CAN1;
hcan.Init.Prescaler = 15;
hcan.Init.Mode = CAN_MODE_NORMAL;
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
hcan.Init.TimeSeg1 = CAN_BS1_1TQ;
hcan.Init.TimeSeg2 = CAN_BS2_1TQ;
hcan.Init.TimeTriggeredMode = DISABLE;
hcan.Init.AutoBusOff = DISABLE;
hcan.Init.AutoWakeUp = DISABLE;
hcan.Init.AutoRetransmission = DISABLE;
hcan.Init.ReceiveFifoLocked = DISABLE;
hcan.Init.TransmitFifoPriority = DISABLE;
if (HAL_CAN_Init(&hcan) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN CAN_Init 2 */
/* USER CODE END CAN_Init 2 */
}
/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* USER CODE BEGIN MX_GPIO_Init_1 */
/* USER CODE END MX_GPIO_Init_1 */
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
/*Configure GPIO pin : PC13 */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN MX_GPIO_Init_2 */
/* USER CODE END MX_GPIO_Init_2 */
}
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}

172
firmware/components/CAN/MainCAN/src/Core/Src/stm32f1xx_hal_msp.c
View File

@@ -1,172 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f1xx_hal_msp.c
* @brief This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_AFIO_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
/* System interrupt init*/
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
*/
__HAL_AFIO_REMAP_SWJ_NOJTAG();
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief CAN MSP Initialization
* This function configures the hardware resources used in this example
* @param hcan: CAN handle pointer
* @retval None
*/
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hcan->Instance==CAN1)
{
/* USER CODE BEGIN CAN1_MspInit 0 */
/* USER CODE END CAN1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_CAN1_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**CAN GPIO Configuration
PB8 ------> CAN_RX
PB9 ------> CAN_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
__HAL_AFIO_REMAP_CAN1_2();
/* CAN1 interrupt Init */
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
HAL_NVIC_SetPriority(CAN1_RX1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(CAN1_RX1_IRQn);
/* USER CODE BEGIN CAN1_MspInit 1 */
/* USER CODE END CAN1_MspInit 1 */
}
}
/**
* @brief CAN MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hcan: CAN handle pointer
* @retval None
*/
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
{
if(hcan->Instance==CAN1)
{
/* USER CODE BEGIN CAN1_MspDeInit 0 */
/* USER CODE END CAN1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_CAN1_CLK_DISABLE();
/**CAN GPIO Configuration
PB8 ------> CAN_RX
PB9 ------> CAN_TX
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
/* CAN1 interrupt DeInit */
/* USER CODE BEGIN CAN1:USB_LP_CAN1_RX0_IRQn disable */
/**
* Uncomment the line below to disable the "USB_LP_CAN1_RX0_IRQn" interrupt
* Be aware, disabling shared interrupt may affect other IPs
*/
/* HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); */
/* USER CODE END CAN1:USB_LP_CAN1_RX0_IRQn disable */
HAL_NVIC_DisableIRQ(CAN1_RX1_IRQn);
/* USER CODE BEGIN CAN1_MspDeInit 1 */
/* USER CODE END CAN1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

406
firmware/components/CAN/MainCAN/src/Core/Src/system_stm32f1xx.c
View File

@@ -1,406 +0,0 @@
/**
******************************************************************************
* @file system_stm32f1xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
*
* 1. This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
* factors, AHB/APBx prescalers and Flash settings).
* This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f1xx_xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
* configure the system clock before to branch to main program.
*
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
* the product used), refer to "HSE_VALUE".
* When HSE is used as system clock source, directly or through PLL, and you
* are using different crystal you have to adapt the HSE value to your own
* configuration.
*
******************************************************************************
* @attention
*
* Copyright (c) 2017-2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f1xx_system
* @{
*/
/** @addtogroup STM32F1xx_System_Private_Includes
* @{
*/
#include "stm32f1xx.h"
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_Defines
* @{
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
This value can be provided and adapted by the user application. */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
This value can be provided and adapted by the user application. */
#endif /* HSI_VALUE */
/*!< Uncomment the following line if you need to use external SRAM */
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
/* #define DATA_IN_ExtSRAM */
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
/* Note: Following vector table addresses must be defined in line with linker
configuration. */
/*!< Uncomment the following line if you need to relocate the vector table
anywhere in Flash or Sram, else the vector table is kept at the automatic
remap of boot address selected */
/* #define USER_VECT_TAB_ADDRESS */
#if defined(USER_VECT_TAB_ADDRESS)
/*!< Uncomment the following line if you need to relocate your vector Table
in Sram else user remap will be done in Flash. */
/* #define VECT_TAB_SRAM */
#if defined(VECT_TAB_SRAM)
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#else
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#endif /* VECT_TAB_SRAM */
#endif /* USER_VECT_TAB_ADDRESS */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 8000000;
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
* @{
*/
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
#ifdef DATA_IN_ExtSRAM
static void SystemInit_ExtMemCtl(void);
#endif /* DATA_IN_ExtSRAM */
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
/**
* @}
*/
/** @addtogroup STM32F1xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemCoreClock variable.
* @note This function should be used only after reset.
* @param None
* @retval None
*/
void SystemInit (void)
{
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
#ifdef DATA_IN_ExtSRAM
SystemInit_ExtMemCtl();
#endif /* DATA_IN_ExtSRAM */
#endif
/* Configure the Vector Table location -------------------------------------*/
#if defined(USER_VECT_TAB_ADDRESS)
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#endif /* USER_VECT_TAB_ADDRESS */
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
* 8 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
* that HSE_VALUE is same as the real frequency of the crystal used.
* Otherwise, this function may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
* @param None
* @retval None
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
#if defined(STM32F105xC) || defined(STM32F107xC)
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
#endif /* STM32F105xC */
#if defined(STM32F100xB) || defined(STM32F100xE)
uint32_t prediv1factor = 0U;
#endif /* STM32F100xB or STM32F100xE */
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00U: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
case 0x04U: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case 0x08U: /* PLL used as system clock */
/* Get PLL clock source and multiplication factor ----------------------*/
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
#if !defined(STM32F105xC) && !defined(STM32F107xC)
pllmull = ( pllmull >> 18U) + 2U;
if (pllsource == 0x00U)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
}
else
{
#if defined(STM32F100xB) || defined(STM32F100xE)
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
/* HSE oscillator clock selected as PREDIV1 clock entry */
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
#else
/* HSE selected as PLL clock entry */
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
{/* HSE oscillator clock divided by 2 */
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
}
else
{
SystemCoreClock = HSE_VALUE * pllmull;
}
#endif
}
#else
pllmull = pllmull >> 18U;
if (pllmull != 0x0DU)
{
pllmull += 2U;
}
else
{ /* PLL multiplication factor = PLL input clock * 6.5 */
pllmull = 13U / 2U;
}
if (pllsource == 0x00U)
{
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
}
else
{/* PREDIV1 selected as PLL clock entry */
/* Get PREDIV1 clock source and division factor */
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
if (prediv1source == 0U)
{
/* HSE oscillator clock selected as PREDIV1 clock entry */
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
}
else
{/* PLL2 clock selected as PREDIV1 clock entry */
/* Get PREDIV2 division factor and PLL2 multiplication factor */
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
}
}
#endif /* STM32F105xC */
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK clock frequency ----------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
/**
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
* before jump to __main
* @param None
* @retval None
*/
#ifdef DATA_IN_ExtSRAM
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
* This function configures the external SRAM mounted on STM3210E-EVAL
* board (STM32 High density devices). This SRAM will be used as program
* data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
__IO uint32_t tmpreg;
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
required, then adjust the Register Addresses */
/* Enable FSMC clock */
RCC->AHBENR = 0x00000114U;
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
RCC->APB2ENR = 0x000001E0U;
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
(void)(tmpreg);
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
/*---------------- SRAM Address lines configuration -------------------------*/
/*---------------- NOE and NWE configuration --------------------------------*/
/*---------------- NE3 configuration ----------------------------------------*/
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
GPIOD->CRL = 0x44BB44BBU;
GPIOD->CRH = 0xBBBBBBBBU;
GPIOE->CRL = 0xB44444BBU;
GPIOE->CRH = 0xBBBBBBBBU;
GPIOF->CRL = 0x44BBBBBBU;
GPIOF->CRH = 0xBBBB4444U;
GPIOG->CRL = 0x44BBBBBBU;
GPIOG->CRH = 0x444B4B44U;
/*---------------- FSMC Configuration ---------------------------------------*/
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
FSMC_Bank1->BTCR[4U] = 0x00001091U;
FSMC_Bank1->BTCR[5U] = 0x00110212U;
}
#endif /* DATA_IN_ExtSRAM */
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/

1485
firmware/components/CAN/MainCAN/src/EWARM/MainCAN.ewd
View File

File diff suppressed because it is too large Load Diff

1175
firmware/components/CAN/MainCAN/src/EWARM/MainCAN.ewp
View File

File diff suppressed because it is too large Load Diff

7
firmware/components/CAN/MainCAN/src/EWARM/Project.eww
View File

@@ -1,7 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<workspace>
<project>
<path>$WS_DIR$\MainCAN.ewp</path>
</project>
<batchBuild />
</workspace>

390
firmware/components/CAN/MainCAN/src/EWARM/startup_stm32f103xb.s
View File

@@ -1,390 +0,0 @@
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
;* File Name : startup_stm32f103xb.s
;* Author : MCD Application Team
;* Description : STM32F103xB Performance Line Devices vector table for
;* EWARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Configure the clock system
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR
;* address.
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;*
;* Copyright (c) 2017-2021 STMicroelectronics.
;* All rights reserved.
;*
;* This software is licensed under terms that can be found in the LICENSE file
;* in the root directory of this software component.
;* If no LICENSE file comes with this software, it is provided AS-IS.
;
;*******************************************************************************
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:REORDER:NOROOT(2)
Reset_Handler
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:REORDER:NOROOT(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTC_Alarm_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
RTC_Alarm_IRQHandler
B RTC_Alarm_IRQHandler
PUBWEAK USBWakeUp_IRQHandler
SECTION .text:CODE:REORDER:NOROOT(1)
USBWakeUp_IRQHandler
B USBWakeUp_IRQHandler
END

31
firmware/components/CAN/MainCAN/src/EWARM/stm32f103xb_flash.icf
View File

@@ -1,31 +0,0 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

31
firmware/components/CAN/MainCAN/src/EWARM/stm32f103xb_sram.icf
View File

@@ -1,31 +0,0 @@
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
define symbol __ICFEDIT_size_heap__ = 0x200;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
block CSTACK, block HEAP };

303
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usbd_cdc_if.c
View File

@@ -1,303 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : usbd_cdc_if.c
* @version : v2.0_Cube
* @brief : Usb device for Virtual Com Port.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc_if.h"
/* USER CODE BEGIN INCLUDE */
/* USER CODE END INCLUDE */
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/
/* USER CODE END PV */
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @brief Usb device library.
* @{
*/
/** @addtogroup USBD_CDC_IF
* @{
*/
/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions
* @brief Private types.
* @{
*/
/* USER CODE BEGIN PRIVATE_TYPES */
/* USER CODE END PRIVATE_TYPES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines
* @brief Private defines.
* @{
*/
/* USER CODE BEGIN PRIVATE_DEFINES */
/* USER CODE END PRIVATE_DEFINES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros
* @brief Private macros.
* @{
*/
/* USER CODE BEGIN PRIVATE_MACRO */
/* USER CODE END PRIVATE_MACRO */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables
* @brief Private variables.
* @{
*/
/* Create buffer for reception and transmission */
/* It's up to user to redefine and/or remove those define */
/** Received data over USB are stored in this buffer */
uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
/** Data to send over USB CDC are stored in this buffer */
uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
/* USER CODE BEGIN PRIVATE_VARIABLES */
/* USER CODE END PRIVATE_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
* @brief Public variables.
* @{
*/
extern USBD_HandleTypeDef hUsbDeviceFS;
/* USER CODE BEGIN EXPORTED_VARIABLES */
/* USER CODE END EXPORTED_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes
* @brief Private functions declaration.
* @{
*/
static int8_t CDC_Init_FS(void);
static int8_t CDC_DeInit_FS(void);
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len);
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
/**
* @}
*/
USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
{
CDC_Init_FS,
CDC_DeInit_FS,
CDC_Control_FS,
CDC_Receive_FS
};
/* Private functions ---------------------------------------------------------*/
/**
* @brief Initializes the CDC media low layer over the FS USB IP
* @retval USBD_OK if all operations are OK else USBD_FAIL
*/
static int8_t CDC_Init_FS(void)
{
/* USER CODE BEGIN 3 */
/* Set Application Buffers */
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
return (USBD_OK);
/* USER CODE END 3 */
}
/**
* @brief DeInitializes the CDC media low layer
* @retval USBD_OK if all operations are OK else USBD_FAIL
*/
static int8_t CDC_DeInit_FS(void)
{
/* USER CODE BEGIN 4 */
return (USBD_OK);
/* USER CODE END 4 */
}
/**
* @brief Manage the CDC class requests
* @param cmd: Command code
* @param pbuf: Buffer containing command data (request parameters)
* @param length: Number of data to be sent (in bytes)
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
*/
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
{
/* USER CODE BEGIN 5 */
switch(cmd)
{
case CDC_SEND_ENCAPSULATED_COMMAND:
break;
case CDC_GET_ENCAPSULATED_RESPONSE:
break;
case CDC_SET_COMM_FEATURE:
break;
case CDC_GET_COMM_FEATURE:
break;
case CDC_CLEAR_COMM_FEATURE:
break;
/*******************************************************************************/
/* Line Coding Structure */
/*-----------------------------------------------------------------------------*/
/* Offset | Field | Size | Value | Description */
/* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
/* 4 | bCharFormat | 1 | Number | Stop bits */
/* 0 - 1 Stop bit */
/* 1 - 1.5 Stop bits */
/* 2 - 2 Stop bits */
/* 5 | bParityType | 1 | Number | Parity */
/* 0 - None */
/* 1 - Odd */
/* 2 - Even */
/* 3 - Mark */
/* 4 - Space */
/* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
/*******************************************************************************/
case CDC_SET_LINE_CODING:
break;
case CDC_GET_LINE_CODING:
break;
case CDC_SET_CONTROL_LINE_STATE:
break;
case CDC_SEND_BREAK:
break;
default:
break;
}
return (USBD_OK);
/* USER CODE END 5 */
}
/**
* @brief Data received over USB OUT endpoint are sent over CDC interface
* through this function.
*
* @note
* This function will issue a NAK packet on any OUT packet received on
* USB endpoint until exiting this function. If you exit this function
* before transfer is complete on CDC interface (ie. using DMA controller)
* it will result in receiving more data while previous ones are still
* not sent.
*
* @param Buf: Buffer of data to be received
* @param Len: Number of data received (in bytes)
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
*/
static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
{
/* USER CODE BEGIN 6 */
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
USBD_CDC_ReceivePacket(&hUsbDeviceFS);
return (USBD_OK);
/* USER CODE END 6 */
}
/**
* @brief CDC_Transmit_FS
* Data to send over USB IN endpoint are sent over CDC interface
* through this function.
* @note
*
*
* @param Buf: Buffer of data to be sent
* @param Len: Number of data to be sent (in bytes)
* @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
*/
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
{
uint8_t result = USBD_OK;
/* USER CODE BEGIN 7 */
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
if (hcdc->TxState != 0){
return USBD_BUSY;
}
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
/* USER CODE END 7 */
return result;
}
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
/**
* @}
*/
/**
* @}
*/

131
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usbd_cdc_if.h
View File

@@ -1,131 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : usbd_cdc_if.h
* @version : v2.0_Cube
* @brief : Header for usbd_cdc_if.c file.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CDC_IF_H__
#define __USBD_CDC_IF_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc.h"
/* USER CODE BEGIN INCLUDE */
/* USER CODE END INCLUDE */
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @brief For Usb device.
* @{
*/
/** @defgroup USBD_CDC_IF USBD_CDC_IF
* @brief Usb VCP device module
* @{
*/
/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
* @brief Defines.
* @{
*/
/* Define size for the receive and transmit buffer over CDC */
#define APP_RX_DATA_SIZE 1024
#define APP_TX_DATA_SIZE 1024
/* USER CODE BEGIN EXPORTED_DEFINES */
/* USER CODE END EXPORTED_DEFINES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
* @brief Types.
* @{
*/
/* USER CODE BEGIN EXPORTED_TYPES */
/* USER CODE END EXPORTED_TYPES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
* @brief Aliases.
* @{
*/
/* USER CODE BEGIN EXPORTED_MACRO */
/* USER CODE END EXPORTED_MACRO */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
* @brief Public variables.
* @{
*/
/** CDC Interface callback. */
extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
/* USER CODE BEGIN EXPORTED_VARIABLES */
/* USER CODE END EXPORTED_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
* @brief Public functions declaration.
* @{
*/
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
/* USER CODE END EXPORTED_FUNCTIONS */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_CDC_IF_H__ */

88
firmware/mainboard/stmf405rgtx/mainboard-stmf405rgtx.ioc Normal file
View File

@@ -0,0 +1,88 @@
#MicroXplorer Configuration settings - do not modify
CAD.formats=
CAD.pinconfig=
CAD.provider=
File.Version=6
GPIO.groupedBy=
KeepUserPlacement=false
Mcu.CPN=STM32F405RGT6
Mcu.Family=STM32F4
Mcu.IP0=NVIC
Mcu.IP1=RCC
Mcu.IP2=SYS
Mcu.IPNb=3
Mcu.Name=STM32F405RGTx
Mcu.Package=LQFP64
Mcu.Pin0=VP_SYS_VS_Systick
Mcu.PinsNb=1
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F405RGTx
MxCube.Version=6.13.0
MxDb.Version=DB.6.0.130
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F405RGTx
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.28.2
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Core/Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=mainboard-stmf405rgtx.ioc
ProjectManager.ProjectName=mainboard-stmf405rgtx
ProjectManager.ProjectStructure=
ProjectManager.RegisterCallBack=
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=EWARM V8.50
ProjectManager.ToolChainLocation=
ProjectManager.UAScriptAfterPath=
ProjectManager.UAScriptBeforePath=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false
RCC.AHBFreq_Value=16000000
RCC.APB1Freq_Value=16000000
RCC.APB2Freq_Value=16000000
RCC.CortexFreq_Value=16000000
RCC.FamilyName=M
RCC.HSE_VALUE=25000000
RCC.HSI_VALUE=16000000
RCC.I2SClocksFreq_Value=96000000
RCC.IPParameters=AHBFreq_Value,APB1Freq_Value,APB2Freq_Value,CortexFreq_Value,FamilyName,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,PLLCLKFreq_Value,PLLQCLKFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
RCC.LSE_VALUE=32768
RCC.LSI_VALUE=32000
RCC.PLLCLKFreq_Value=96000000
RCC.PLLQCLKFreq_Value=48000000
RCC.RTCFreq_Value=32000
RCC.RTCHSEDivFreq_Value=12500000
RCC.SYSCLKFreq_VALUE=16000000
RCC.VCOI2SOutputFreq_Value=192000000
RCC.VCOInputFreq_Value=1000000
RCC.VCOOutputFreq_Value=192000000
RCC.VcooutputI2S=96000000
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom

2
firmware/mainboard/stmf446retx/.gitignore vendored Normal file
View File

@@ -0,0 +1,2 @@
.pio
.vscode

210
firmware/mainboard/stmf446retx/.vscode/c_cpp_properties.json vendored Normal file
View File

@@ -0,0 +1,210 @@
//
// !!! WARNING !!! AUTO-GENERATED FILE!
// PLEASE DO NOT MODIFY IT AND USE "platformio.ini":
// https://docs.platformio.org/page/projectconf/section_env_build.html#build-flags
//
{
"configurations": [
{
"name": "PlatformIO",
"includePath": [
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CompositeBuilder/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CompositeBuilder/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/HID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/HID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/VIDEO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/VIDEO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/Printer/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/Printer/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MTP/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MTP/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CustomHID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CustomHID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_RNDIS/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_RNDIS/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_ECM/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_ECM/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CCID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CCID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/AUDIO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/AUDIO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Core/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Core/Src",
"/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/Src",
"/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/Device/ST/STM32F4xx/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/STM32F4xx_HAL_Driver/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/STM32F4xx_HAL_Driver/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/DSP/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/Common",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ampire480272",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ampire640480",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/cs43l22",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/dp83848",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/exc7200",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ft3x67",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ft6x06",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/i3g4250d",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ili9325",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ili9341",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/l3gd20",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lan8742",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lis302dl",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lis3dsh",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ls016b8uy",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lsm303agr",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lsm303dlhc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/mfxstm32l152",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q128a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q256a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q512a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/nt35510",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/otm8009a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ov2640",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ov5640",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/s25fl512s",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/s5k5cag",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/st7735",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/st7789h2",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/stmpe1600",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/stmpe811",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ts3510",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/wm8994",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Adafruit_Shield",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/CPU",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/Fonts",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/Log",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/BillBoard/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/BillBoard/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Core/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Core/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/AUDIO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/AUDIO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/HID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/HID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MTP/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MTP/Src",
""
],
"browse": {
"limitSymbolsToIncludedHeaders": true,
"path": [
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CompositeBuilder/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CompositeBuilder/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/HID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/HID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/VIDEO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/VIDEO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/Printer/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/Printer/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MTP/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MTP/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/DFU/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CustomHID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CustomHID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_RNDIS/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_RNDIS/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_ECM/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC_ECM/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CCID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/CCID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/AUDIO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/AUDIO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Core/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Core/Src",
"/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/Src",
"/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/Device/ST/STM32F4xx/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/STM32F4xx_HAL_Driver/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/STM32F4xx_HAL_Driver/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/CMSIS/DSP/Include",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/Common",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ampire480272",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ampire640480",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/cs43l22",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/dp83848",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/exc7200",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ft3x67",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ft6x06",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/i3g4250d",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ili9325",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ili9341",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/l3gd20",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lan8742",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lis302dl",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lis3dsh",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ls016b8uy",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lsm303agr",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/lsm303dlhc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/mfxstm32l152",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q128a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q256a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/n25q512a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/nt35510",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/otm8009a",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ov2640",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ov5640",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/s25fl512s",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/s5k5cag",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/st7735",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/st7789h2",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/stmpe1600",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/stmpe811",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/ts3510",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Components/wm8994",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Drivers/BSP/Adafruit_Shield",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/CPU",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/Fonts",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Utilities/Log",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/BillBoard/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Device_Library/Class/BillBoard/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Core/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Core/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/AUDIO/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/AUDIO/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/CDC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/HID/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/HID/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MTP/Inc",
"/home/kymkim/.platformio/packages/framework-stm32cubef4/Middlewares/ST/STM32_USB_Host_Library/Class/MTP/Src",
""
]
},
"defines": [
"PLATFORMIO=60118",
"STM32F4",
"STM32F446xx",
"USE_HAL_DRIVER",
"F_CPU=180000000L",
""
],
"compilerPath": "/home/kymkim/.platformio/packages/toolchain-gccarmnoneeabi/bin/arm-none-eabi-gcc",
"compilerArgs": [
"-mthumb",
"-mcpu=cortex-m4",
""
]
}
],
"version": 4
}

0
firmware/components/CAN/MainCAN/.vscode/extensions.json → firmware/mainboard/stmf446retx/.vscode/extensions.json vendored
View File

47
firmware/mainboard/stmf446retx/.vscode/launch.json vendored Normal file
View File

@@ -0,0 +1,47 @@
// AUTOMATICALLY GENERATED FILE. PLEASE DO NOT MODIFY IT MANUALLY
//
// PlatformIO Debugging Solution
//
// Documentation: https://docs.platformio.org/en/latest/plus/debugging.html
// Configuration: https://docs.platformio.org/en/latest/projectconf/sections/env/options/debug/index.html
{
"version": "0.2.0",
"configurations": [
{
"type": "platformio-debug",
"request": "launch",
"name": "PIO Debug",
"executable": "/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/.pio/build/nucleo_f446re/firmware.elf",
"projectEnvName": "nucleo_f446re",
"toolchainBinDir": "/home/kymkim/.platformio/packages/toolchain-gccarmnoneeabi/bin",
"internalConsoleOptions": "openOnSessionStart",
"svdPath": "/home/kymkim/.platformio/platforms/ststm32/misc/svd/STM32F446x.svd",
"preLaunchTask": {
"type": "PlatformIO",
"task": "Pre-Debug"
}
},
{
"type": "platformio-debug",
"request": "launch",
"name": "PIO Debug (skip Pre-Debug)",
"executable": "/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/.pio/build/nucleo_f446re/firmware.elf",
"projectEnvName": "nucleo_f446re",
"toolchainBinDir": "/home/kymkim/.platformio/packages/toolchain-gccarmnoneeabi/bin",
"internalConsoleOptions": "openOnSessionStart",
"svdPath": "/home/kymkim/.platformio/platforms/ststm32/misc/svd/STM32F446x.svd"
},
{
"type": "platformio-debug",
"request": "launch",
"name": "PIO Debug (without uploading)",
"executable": "/home/kymkim/Projects/CSULB/modular-kbd/firmware/components/mainboard/stmf446retx/.pio/build/nucleo_f446re/firmware.elf",
"projectEnvName": "nucleo_f446re",
"toolchainBinDir": "/home/kymkim/.platformio/packages/toolchain-gccarmnoneeabi/bin",
"internalConsoleOptions": "openOnSessionStart",
"svdPath": "/home/kymkim/.platformio/platforms/ststm32/misc/svd/STM32F446x.svd",
"loadMode": "manual"
}
]
}

5
firmware/mainboard/stmf446retx/.vscode/settings.json vendored Normal file
View File

@@ -0,0 +1,5 @@
{
"files.associations": {
"usbd_hid.h": "c"
}
}

52
firmware/mainboard/stmf446retx/Inc/can.h Normal file
View File

@@ -0,0 +1,52 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file can.h
* @brief This file contains all the function prototypes for
* the can.c file
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __CAN_H__
#define __CAN_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
extern CAN_HandleTypeDef hcan1;
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_CAN1_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /* __CAN_H__ */

49
firmware/mainboard/stmf446retx/Inc/gpio.h Normal file
View File

@@ -0,0 +1,49 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.h
* @brief This file contains all the function prototypes for
* the gpio.c file
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __GPIO_H__
#define __GPIO_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
void MX_GPIO_Init(void);
/* USER CODE BEGIN Prototypes */
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /*__ GPIO_H__ */

204
firmware/mainboard/stmf446retx/Inc/main.h Normal file
View File

@@ -0,0 +1,204 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
// Modifier Keys
#define KEY_LEFT_CTRL 0xE0
#define KEY_LEFT_SHIFT 0xE1
#define KEY_LEFT_ALT 0xE2
#define KEY_LEFT_GUI 0xE3
#define KEY_RIGHT_CTRL 0xE4
#define KEY_RIGHT_SHIFT 0xE5
#define KEY_RIGHT_ALT 0xE6
#define KEY_RIGHT_GUI 0xE7
// Regular Keys (Usage ID 0x04–0x73)
#define KEY_A 0x04
#define KEY_B 0x05
#define KEY_C 0x06
#define KEY_D 0x07
#define KEY_E 0x08
#define KEY_F 0x09
#define KEY_G 0x0A
#define KEY_H 0x0B
#define KEY_I 0x0C
#define KEY_J 0x0D
#define KEY_K 0x0E
#define KEY_L 0x0F
#define KEY_M 0x10
#define KEY_N 0x11
#define KEY_O 0x12
#define KEY_P 0x13
#define KEY_Q 0x14
#define KEY_R 0x15
#define KEY_S 0x16
#define KEY_T 0x17
#define KEY_U 0x18
#define KEY_V 0x19
#define KEY_W 0x1A
#define KEY_X 0x1B
#define KEY_Y 0x1C
#define KEY_Z 0x1D
#define KEY_1 0x1E
#define KEY_2 0x1F
#define KEY_3 0x20
#define KEY_4 0x21
#define KEY_5 0x22
#define KEY_6 0x23
#define KEY_7 0x24
#define KEY_8 0x25
#define KEY_9 0x26
#define KEY_0 0x27
#define KEY_ENTER 0x28
#define KEY_ESC 0x29
#define KEY_BACKSPACE 0x2A
#define KEY_TAB 0x2B
#define KEY_SPACE 0x2C
#define KEY_MINUS 0x2D
#define KEY_EQUAL 0x2E
#define KEY_LEFT_BRACKET 0x2F
#define KEY_RIGHT_BRACKET 0x30
#define KEY_BACKSLASH 0x31
#define KEY_NON_US_HASH 0x32
#define KEY_SEMICOLON 0x33
#define KEY_APOSTROPHE 0x34
#define KEY_GRAVE 0x35
#define KEY_COMMA 0x36
#define KEY_PERIOD 0x37
#define KEY_SLASH 0x38
#define KEY_CAPS_LOCK 0x39
// Function Keys
#define KEY_F1 0x3A
#define KEY_F2 0x3B
#define KEY_F3 0x3C
#define KEY_F4 0x3D
#define KEY_F5 0x3E
#define KEY_F6 0x3F
#define KEY_F7 0x40
#define KEY_F8 0x41
#define KEY_F9 0x42
#define KEY_F10 0x43
#define KEY_F11 0x44
#define KEY_F12 0x45
#define KEY_PRINT_SCREEN 0x46
#define KEY_SCROLL_LOCK 0x47
#define KEY_PAUSE 0x48
// Navigation Keys
#define KEY_INSERT 0x49
#define KEY_HOME 0x4A
#define KEY_PAGE_UP 0x4B
#define KEY_DELETE 0x4C
#define KEY_END 0x4D
#define KEY_PAGE_DOWN 0x4E
#define KEY_RIGHT_ARROW 0x4F
#define KEY_LEFT_ARROW 0x50
#define KEY_DOWN_ARROW 0x51
#define KEY_UP_ARROW 0x52
// Keypad
#define KEY_NUM_LOCK 0x53
#define KEYPAD_SLASH 0x54
#define KEYPAD_ASTERISK 0x55
#define KEYPAD_MINUS 0x56
#define KEYPAD_PLUS 0x57
#define KEYPAD_ENTER 0x58
#define KEYPAD_1 0x59
#define KEYPAD_2 0x5A
#define KEYPAD_3 0x5B
#define KEYPAD_4 0x5C
#define KEYPAD_5 0x5D
#define KEYPAD_6 0x5E
#define KEYPAD_7 0x5F
#define KEYPAD_8 0x60
#define KEYPAD_9 0x61
#define KEYPAD_0 0x62
#define KEYPAD_DOT 0x63
// Misc/Non-US
#define KEY_NON_US_BACKSLASH 0x64
#define KEY_APPLICATION 0x65
#define KEY_POWER 0x66
#define KEYPAD_EQUAL 0x67
#define KEY_F13 0x68
#define KEY_F14 0x69
#define KEY_F15 0x6A
#define KEY_F16 0x6B
#define KEY_F17 0x6C
#define KEY_F18 0x6D
#define KEY_F19 0x6E
#define KEY_F20 0x6F
#define KEY_F21 0x70
#define KEY_F22 0x71
#define KEY_F23 0x72
#define KEY_F24 0x73
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */

160
firmware/mainboard/stmf446retx/Inc/mainboard_usb.h Normal file
View File

@@ -0,0 +1,160 @@
/**
******************************************************************************
* @file usbd_hid.h
* @author MCD Application Team
* @brief Header file for the usbd_hid_core.c file.
******************************************************************************
* @attention
*
* Copyright (c) 2015 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_HID_H
#define __USB_HID_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_HID
* @brief This file is the Header file for usbd_hid.c
* @{
*/
/** @defgroup USBD_HID_Exported_Defines
* @{
*/
#ifndef HID_EPIN_ADDR
#define HID_EPIN_ADDR 0x81U
#endif /* HID_EPIN_ADDR */
#define HID_EPIN_SIZE 0x0EU
#define USB_HID_CONFIG_DESC_SIZ 34U
#define USB_HID_DESC_SIZ 9U
#define HID_MOUSE_REPORT_DESC_SIZE 0x2DU
#define HID_DESCRIPTOR_TYPE 0x21U
#define HID_REPORT_DESC 0x22U
#ifndef HID_HS_BINTERVAL
#define HID_HS_BINTERVAL 0x07U
#endif /* HID_HS_BINTERVAL */
#ifndef HID_FS_BINTERVAL
#define HID_FS_BINTERVAL 0x0AU
#endif /* HID_FS_BINTERVAL */
#define USBD_HID_REQ_SET_PROTOCOL 0x0BU
#define USBD_HID_REQ_GET_PROTOCOL 0x03U
#define USBD_HID_REQ_SET_IDLE 0x0AU
#define USBD_HID_REQ_GET_IDLE 0x02U
#define USBD_HID_REQ_SET_REPORT 0x09U
#define USBD_HID_REQ_GET_REPORT 0x01U
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
typedef enum
{
USBD_HID_IDLE = 0,
USBD_HID_BUSY,
} USBD_HID_StateTypeDef;
typedef struct
{
uint32_t Protocol;
uint32_t IdleState;
uint32_t AltSetting;
USBD_HID_StateTypeDef state;
} USBD_HID_HandleTypeDef;
/*
* HID Class specification version 1.1
* 6.2.1 HID Descriptor
*/
typedef struct
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdHID;
uint8_t bCountryCode;
uint8_t bNumDescriptors;
uint8_t bHIDDescriptorType;
uint16_t wItemLength;
} __PACKED USBD_HIDDescTypeDef;
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
extern USBD_ClassTypeDef USBD_HID;
#define USBD_HID_CLASS &USBD_HID
/**
* @}
*/
/** @defgroup USB_CORE_Exported_Functions
* @{
*/
#ifdef USE_USBD_COMPOSITE
uint8_t USBD_HID_SendReport(USBD_HandleTypeDef *pdev, uint8_t *report, uint16_t len, uint8_t ClassId);
#else
uint8_t USBD_HID_SendReport(USBD_HandleTypeDef *pdev, uint8_t *report, uint16_t len);
#endif /* USE_USBD_COMPOSITE */
uint32_t USBD_HID_GetPollingInterval(USBD_HandleTypeDef *pdev);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USB_HID_H */
/**
* @}
*/
/**
* @}
*/

495
firmware/mainboard/stmf446retx/Inc/stm32f4xx_hal_conf.h Normal file
View File

@@ -0,0 +1,495 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f4xx_hal_conf_template.h
* @author MCD Application Team
* @brief HAL configuration template file.
* This file should be copied to the application folder and renamed
* to stm32f4xx_hal_conf.h.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_H
#define __STM32F4xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_ADC_MODULE_ENABLED */
#define HAL_CAN_MODULE_ENABLED
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
/* #define HAL_UART_MODULE_ENABLED */
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_FMPSMBUS_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY 0x000000FFU
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY 0x00000FFFU
#define PHY_READ_TO 0x0000FFFFU
#define PHY_WRITE_TO 0x0000FFFFU
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f4xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "stm32f4xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
#include "stm32f4xx_hal_eth_legacy.h"
#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f4xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f4xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f4xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f4xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_FMPI2C_MODULE_ENABLED
#include "stm32f4xx_hal_fmpi2c.h"
#endif /* HAL_FMPI2C_MODULE_ENABLED */
#ifdef HAL_FMPSMBUS_MODULE_ENABLED
#include "stm32f4xx_hal_fmpsmbus.h"
#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f4xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f4xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f4xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_H */

68
firmware/mainboard/stmf446retx/Inc/stm32f4xx_it.h Normal file
View File

@@ -0,0 +1,68 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f4xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_IT_H
#define __STM32F4xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void SVC_Handler(void);
void DebugMon_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void CAN1_RX0_IRQHandler(void);
void OTG_FS_IRQHandler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_IT_H */

6
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usb_device.h → firmware/mainboard/stmf446retx/Inc/usb_device.h
View File

@@ -2,7 +2,7 @@
/**
******************************************************************************
* @file : usb_device.h
* @version : v2.0_Cube
* @version : v1.0_Cube
* @brief : Header for usb_device.c file.
******************************************************************************
* @attention
@@ -27,8 +27,8 @@
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
#include "stm32f1xx_hal.h"
#include "stm32f4xx.h"
#include "stm32f4xx_hal.h"
#include "usbd_def.h"
/* USER CODE BEGIN INCLUDE */

50
firmware/components/CAN/MainCAN/src/USB_DEVICE/Target/usbd_conf.h → firmware/mainboard/stmf446retx/Inc/usbd_conf.h
View File

@@ -2,7 +2,7 @@
/**
******************************************************************************
* @file : usbd_conf.h
* @version : v2.0_Cube
* @version : v1.0_Cube
* @brief : Header for usbd_conf.c file.
******************************************************************************
* @attention
@@ -31,14 +31,15 @@
#include <stdlib.h>
#include <string.h>
#include "main.h"
#include "stm32f1xx.h"
#include "stm32f1xx_hal.h"
#include "stm32f4xx.h"
#include "stm32f4xx_hal.h"
/* USER CODE BEGIN INCLUDE */
/* USER CODE END INCLUDE */
/** @addtogroup USBD_OTG_DRIVER
* @brief Driver for Usb device.
* @{
*/
@@ -62,21 +63,24 @@
*/
/*---------- -----------*/
#define USBD_MAX_NUM_INTERFACES 1
#define USBD_MAX_NUM_INTERFACES 1U
/*---------- -----------*/
#define USBD_MAX_NUM_CONFIGURATION 1
#define USBD_MAX_NUM_CONFIGURATION 1U
/*---------- -----------*/
#define USBD_MAX_STR_DESC_SIZ 512
#define USBD_MAX_STR_DESC_SIZ 512U
/*---------- -----------*/
#define USBD_DEBUG_LEVEL 0
#define USBD_DEBUG_LEVEL 0U
/*---------- -----------*/
#define USBD_SELF_POWERED 1
#define USBD_LPM_ENABLED 1U
/*---------- -----------*/
#define MAX_STATIC_ALLOC_SIZE 512
#define USBD_SELF_POWERED 1U
/*---------- -----------*/
#define HID_FS_BINTERVAL 0xAU
/****************************************/
/* #define for FS and HS identification */
#define DEVICE_FS 0
#define DEVICE_HS 1
/**
* @}
@@ -86,29 +90,23 @@
* @brief Aliases.
* @{
*/
/* Memory management macros */
/* Memory management macros make sure to use static memory allocation */
/** Alias for memory allocation. */
#define USBD_malloc (uint32_t *)USBD_static_malloc
#define USBD_malloc (void *)USBD_static_malloc
/** Alias for memory release. */
#define USBD_free USBD_static_free
/** Alias for memory set. */
#define USBD_memset /* Not used */
#define USBD_memset memset
/** Alias for memory copy. */
#define USBD_memcpy /* Not used */
#define USBD_memcpy memcpy
/** Alias for delay. */
#define USBD_Delay HAL_Delay
/* For footprint reasons and since only one allocation is handled in the HID class
driver, the malloc/free is changed into a static allocation method */
void *USBD_static_malloc(uint32_t size);
void USBD_static_free(void *p);
/* DEBUG macros */
#if (USBD_DEBUG_LEVEL > 0)
@@ -116,24 +114,24 @@ void USBD_static_free(void *p);
printf("\n");
#else
#define USBD_UsrLog(...)
#endif
#endif /* (USBD_DEBUG_LEVEL > 0U) */
#if (USBD_DEBUG_LEVEL > 1)
#define USBD_ErrLog(...) printf("ERROR: ") ;\
#define USBD_ErrLog(...) printf("ERROR: ");\
printf(__VA_ARGS__);\
printf("\n");
#else
#define USBD_ErrLog(...)
#endif
#endif /* (USBD_DEBUG_LEVEL > 1U) */
#if (USBD_DEBUG_LEVEL > 2)
#define USBD_DbgLog(...) printf("DEBUG : ") ;\
#define USBD_DbgLog(...) printf("DEBUG : ");\
printf(__VA_ARGS__);\
printf("\n");
#else
#define USBD_DbgLog(...)
#endif
#endif /* (USBD_DEBUG_LEVEL > 2U) */
/**
* @}
@@ -154,6 +152,8 @@ void USBD_static_free(void *p);
*/
/* Exported functions -------------------------------------------------------*/
void *USBD_static_malloc(uint32_t size);
void USBD_static_free(void *p);
/**
* @}

2
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usbd_desc.h → firmware/mainboard/stmf446retx/Inc/usbd_desc.h
View File

@@ -2,7 +2,7 @@
/**
******************************************************************************
* @file : usbd_desc.c
* @version : v2.0_Cube
* @version : v1.0_Cube
* @brief : Header for usbd_conf.c file.
******************************************************************************
* @attention

132
firmware/mainboard/stmf446retx/Src/can.c Normal file
View File

@@ -0,0 +1,132 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file can.c
* @brief This file provides code for the configuration
* of the CAN instances.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "can.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
CAN_HandleTypeDef hcan1;
/* CAN1 init function */
void MX_CAN1_Init(void)
{
/* USER CODE BEGIN CAN1_Init 0 */
/* USER CODE END CAN1_Init 0 */
/* USER CODE BEGIN CAN1_Init 1 */
/* USER CODE END CAN1_Init 1 */
hcan1.Instance = CAN1;
hcan1.Init.Prescaler = 6;
hcan1.Init.Mode = CAN_MODE_NORMAL;
hcan1.Init.SyncJumpWidth = CAN_SJW_1TQ;
hcan1.Init.TimeSeg1 = CAN_BS1_16TQ;
hcan1.Init.TimeSeg2 = CAN_BS2_7TQ;
hcan1.Init.TimeTriggeredMode = DISABLE;
hcan1.Init.AutoBusOff = DISABLE;
hcan1.Init.AutoWakeUp = DISABLE;
hcan1.Init.AutoRetransmission = DISABLE;
hcan1.Init.ReceiveFifoLocked = DISABLE;
hcan1.Init.TransmitFifoPriority = DISABLE;
if (HAL_CAN_Init(&hcan1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN CAN1_Init 2 */
CAN_FilterTypeDef canfilterconf;
canfilterconf.FilterActivation = CAN_FILTER_ENABLE;
canfilterconf.FilterBank = 0;
canfilterconf.FilterFIFOAssignment = CAN_FILTER_FIFO1;
canfilterconf.FilterIdHigh = 0x399 << 5;
canfilterconf.FilterIdLow = 0x0000;
canfilterconf.FilterMaskIdHigh = 0x7FF << 5;
canfilterconf.FilterMaskIdLow = 0x0000;
canfilterconf.FilterMode = CAN_FILTERMODE_IDMASK;
canfilterconf.FilterScale = CAN_FILTERSCALE_32BIT;
HAL_CAN_ConfigFilter(&hcan1, &canfilterconf);
/* USER CODE END CAN1_Init 2 */
}
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(canHandle->Instance==CAN1)
{
/* USER CODE BEGIN CAN1_MspInit 0 */
/* USER CODE END CAN1_MspInit 0 */
/* CAN1 clock enable */
__HAL_RCC_CAN1_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**CAN1 GPIO Configuration
PB8 ------> CAN1_RX
PB9 ------> CAN1_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* CAN1 interrupt Init */
HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(CAN1_RX0_IRQn);
/* USER CODE BEGIN CAN1_MspInit 1 */
/* USER CODE END CAN1_MspInit 1 */
}
}
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
{
if(canHandle->Instance==CAN1)
{
/* USER CODE BEGIN CAN1_MspDeInit 0 */
/* USER CODE END CAN1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_CAN1_CLK_DISABLE();
/**CAN1 GPIO Configuration
PB8 ------> CAN1_RX
PB9 ------> CAN1_TX
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
/* CAN1 interrupt Deinit */
HAL_NVIC_DisableIRQ(CAN1_RX0_IRQn);
/* USER CODE BEGIN CAN1_MspDeInit 1 */
/* USER CODE END CAN1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

79
firmware/mainboard/stmf446retx/Src/gpio.c Normal file
View File

@@ -0,0 +1,79 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file gpio.c
* @brief This file provides code for the configuration
* of all used GPIO pins.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "gpio.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/*----------------------------------------------------------------------------*/
/* Configure GPIO */
/*----------------------------------------------------------------------------*/
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/** Configure pins as
* Analog
* Input
* Output
* EVENT_OUT
* EXTI
*/
void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13|GPIO_PIN_14, GPIO_PIN_RESET);
/*Configure GPIO pins : PB13 PB14 */
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : PB15 */
GPIO_InitStruct.Pin = GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : PC6 */
GPIO_InitStruct.Pin = GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
}
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */

282
firmware/mainboard/stmf446retx/Src/main.c Normal file
View File

@@ -0,0 +1,282 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "can.h"
#include "usb_device.h"
#include "mainboard_usb.h"
#include "gpio.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
typedef struct{
uint8_t MODIFIER;
uint8_t RESERVED;
uint8_t KEYPRESS[13];
} HIDReportNKRO;
typedef struct{
uint8_t MODIFIER;
uint8_t RESERVED;
uint8_t KEYPRESS[6]; // for 6 Key Rollover, changed index to 6.
} HIDReport6KRO;
typedef struct{
GPIO_TypeDef* PORT;
uint16_t PIN;
} KbdPins;
extern USBD_HandleTypeDef hUsbDeviceFS;
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
#define ROWS 2
#define COLS 2
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
uint8_t matrix[ROWS][COLS] = {
{KEY_M, KEY_K},
{KEY_I, KEY_U}
};
KbdPins row_pins[ROWS] = {
{GPIOC, GPIO_PIN_6},
{GPIOB, GPIO_PIN_15}
};
KbdPins col_pins[COLS] = {
{GPIOB, GPIO_PIN_14},
{GPIOB, GPIO_PIN_13}
};
HIDReportNKRO REPORT = {0,0,0,0,0,0,0,0};
CAN_RxHeaderTypeDef RxHeader;
uint8_t RxData[8];
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
void addHIDReport(uint8_t usageID, uint8_t isPressed);
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_CAN1_Init();
MX_USB_DEVICE_Init();
/* USER CODE BEGIN 2 */
HAL_CAN_Start(&hcan1);
HAL_CAN_ActivateNotification(&hcan1, CAN_IT_RX_FIFO0_MSG_PENDING);
HAL_Delay(50);
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
//Keycode Scan
// memset(REPORT.KEYPRESS, 0, 6); // Clear keypresses at the start of each scan for 6 key rollover
/* USER CODE END WHILE */
for(int col = 0; col < COLS; col++){
HAL_GPIO_WritePin(col_pins[col].PORT, col_pins[col].PIN, GPIO_PIN_SET);
HAL_Delay(1);
for(int row = 0; row < ROWS; row++){
if(HAL_GPIO_ReadPin(row_pins[row].PORT, row_pins[row].PIN)){
addHIDReport(matrix[row][col], 1);
}else{
addHIDReport(matrix[row][col], 0);
}
}
HAL_GPIO_WritePin(col_pins[col].PORT, col_pins[col].PIN, GPIO_PIN_RESET);
}
USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t*)&REPORT, sizeof(REPORT));
HAL_Delay(20);
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan)
{
HAL_CAN_GetRxMessage(hcan, CAN_RX_FIFO0, &RxHeader, RxData);
addHIDReport(RxData[0], (RxData[1] & (1 << 7)) ? 1 : 0);
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Configure the main internal regulator output voltage
*/
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3);
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 4;
RCC_OscInitStruct.PLL.PLLN = 72;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 3;
RCC_OscInitStruct.PLL.PLLR = 2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE BEGIN 4 */
//Converts UsageID to NKRO bit field and add it to the report
void addHIDReport(uint8_t usageID, uint8_t isPressed){
if(usageID < 0x04 || usageID > 0x73) return; //Usage ID is out of bounds
uint16_t bit_index = usageID - 0x04; //Offset, UsageID starts with 0x04. Gives us the actual value of the bit
uint8_t byte_index = bit_index/8; //Calculates which byte in the REPORT array
uint8_t bit_offset = bit_index%8; //Calculates which bits in the REPORT[byte_index] should be set/unset
if(isPressed){
REPORT.KEYPRESS[byte_index] |= (1 << bit_offset);
}else{
REPORT.KEYPRESS[byte_index] &= ~(1 << bit_offset);
}
}
// 6 KEY ROLLOVER CODE STRUCTURE
/*
if (usageID < 0x04 || usageID > 0x73) return;
int i, empty = -1;
if (isPressed) {
for (i = 0; i < 6; i++) {
if (REPORT.KEYPRESS[i] == usageID) return; // Already present
if (REPORT.KEYPRESS[i] == 0 && empty == -1) empty = i;
}
if (empty != -1) {
REPORT.KEYPRESS[empty] = usageID;
}
// If no empty slot, ignore (6KRO: only 6 keys allowed)
} else {
// Remove from the array when released
for (i = 0; i < 6; i++) {
if (REPORT.KEYPRESS[i] == usageID) {
REPORT.KEYPRESS[i] = 0;
}
}
}
*/
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

673
firmware/mainboard/stmf446retx/Src/mainboard_usb.c Normal file
View File

@@ -0,0 +1,673 @@
/**
******************************************************************************
* @file usbd_hid.c
* @author MCD Application Team
* @brief This file provides the HID core functions.
*
******************************************************************************
* @attention
*
* Copyright (c) 2015 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
* @verbatim
*
* ===================================================================
* HID Class Description
* ===================================================================
* This module manages the HID class V1.11 following the "Device Class Definition
* for Human Interface Devices (HID) Version 1.11 Jun 27, 2001".
* This driver implements the following aspects of the specification:
* - The Boot Interface Subclass
* - The Mouse protocol
* - Usage Page : Generic Desktop
* - Usage : Joystick
* - Collection : Application
*
* @note In HS mode and when the DMA is used, all variables and data structures
* dealing with the DMA during the transaction process should be 32-bit aligned.
*
*
* @endverbatim
*
******************************************************************************
*/
/* BSPDependencies
- "stm32xxxxx_{eval}{discovery}{nucleo_144}.c"
- "stm32xxxxx_{eval}{discovery}_io.c"
EndBSPDependencies */
/* Includes ------------------------------------------------------------------*/
#include "usbd_hid.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_HID
* @brief usbd core module
* @{
*/
/** @defgroup USBD_HID_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_HID_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_HID_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_HID_Private_FunctionPrototypes
* @{
*/
static uint8_t USBD_HID_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
static uint8_t USBD_HID_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
static uint8_t USBD_HID_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
static uint8_t USBD_HID_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum);
#ifndef USE_USBD_COMPOSITE
static uint8_t *USBD_HID_GetFSCfgDesc(uint16_t *length);
static uint8_t *USBD_HID_GetHSCfgDesc(uint16_t *length);
static uint8_t *USBD_HID_GetOtherSpeedCfgDesc(uint16_t *length);
static uint8_t *USBD_HID_GetDeviceQualifierDesc(uint16_t *length);
#endif /* USE_USBD_COMPOSITE */
/**
* @}
*/
/** @defgroup USBD_HID_Private_Variables
* @{
*/
USBD_ClassTypeDef USBD_HID =
{
USBD_HID_Init,
USBD_HID_DeInit,
USBD_HID_Setup,
NULL, /* EP0_TxSent */
NULL, /* EP0_RxReady */
USBD_HID_DataIn, /* DataIn */
NULL, /* DataOut */
NULL, /* SOF */
NULL,
NULL,
#ifdef USE_USBD_COMPOSITE
NULL,
NULL,
NULL,
NULL,
#else
USBD_HID_GetHSCfgDesc,
USBD_HID_GetFSCfgDesc,
USBD_HID_GetOtherSpeedCfgDesc,
USBD_HID_GetDeviceQualifierDesc,
#endif /* USE_USBD_COMPOSITE */
};
#ifndef USE_USBD_COMPOSITE
/* USB HID device FS Configuration Descriptor */
__ALIGN_BEGIN static uint8_t USBD_HID_CfgDesc[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuration Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_HID_CONFIG_DESC_SIZ, /* wTotalLength: Bytes returned */
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor
describing the configuration */
#if (USBD_SELF_POWERED == 1U)
0xE0, /* bmAttributes: Bus Powered according to user configuration */
#else
0xA0, /* bmAttributes: Bus Powered according to user configuration */
#endif /* USBD_SELF_POWERED */
USBD_MAX_POWER, /* MaxPower (mA) */
/************** Descriptor of Joystick Mouse interface ****************/
/* 09 */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints */
0x03, /* bInterfaceClass: HID */
0x00, /* bInterfaceSubClass : 1=BOOT, 0=no boot */
0x00, /* nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse */
0, /* iInterface: Index of string descriptor */
/******************** Descriptor of Joystick Mouse HID ********************/
/* 18 */
0x09, /* bLength: HID Descriptor size */
HID_DESCRIPTOR_TYPE, /* bDescriptorType: HID */
0x11, /* bcdHID: HID Class Spec release number */
0x01,
0x00, /* bCountryCode: Hardware target country */
0x01, /* bNumDescriptors: Number of HID class descriptors to follow */
0x22, /* bDescriptorType */
HID_MOUSE_REPORT_DESC_SIZE, /* wItemLength: Total length of Report descriptor */
0x00,
/******************** Descriptor of Mouse endpoint ********************/
/* 27 */
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType:*/
HID_EPIN_ADDR, /* bEndpointAddress: Endpoint Address (IN) */
0x03, /* bmAttributes: Interrupt endpoint */
HID_EPIN_SIZE, /* wMaxPacketSize: 4 Bytes max */
0x00,
HID_FS_BINTERVAL, /* bInterval: Polling Interval */
/* 34 */
};
#endif /* USE_USBD_COMPOSITE */
/* USB HID device Configuration Descriptor */
__ALIGN_BEGIN static uint8_t USBD_HID_Desc[USB_HID_DESC_SIZ] __ALIGN_END =
{
/* 18 */
0x09, /* bLength: HID Descriptor size */
HID_DESCRIPTOR_TYPE, /* bDescriptorType: HID */
0x11, /* bcdHID: HID Class Spec release number */
0x01,
0x00, /* bCountryCode: Hardware target country */
0x01, /* bNumDescriptors: Number of HID class descriptors to follow */
0x22, /* bDescriptorType */
HID_MOUSE_REPORT_DESC_SIZE, /* wItemLength: Total length of Report descriptor */
0x00,
};
#ifndef USE_USBD_COMPOSITE
/* USB Standard Device Descriptor */
__ALIGN_BEGIN static uint8_t USBD_HID_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
{
USB_LEN_DEV_QUALIFIER_DESC,
USB_DESC_TYPE_DEVICE_QUALIFIER,
0x00,
0x02,
0x00,
0x00,
0x00,
0x40,
0x01,
0x00,
};
#endif /* USE_USBD_COMPOSITE */
__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END =
{
// 0x05, 0x01, /* Usage Page (Generic Desktop Ctrls) */
// 0x09, 0x05, /* Usage (Gamepad) */
// 0xA1, 0x01, /* Collection (Application) */
// // --- Buttons: 13 total ---
// 0x05, 0x09, // USAGE_PAGE (Button)
// 0x19, 0x01, // USAGE_MINIMUM (Button 1)
// 0x29, 0x0D, // USAGE_MAXIMUM (Button 13)
// 0x15, 0x00, // LOGICAL_MINIMUM (0)
// 0x25, 0x01, // LOGICAL_MAXIMUM (1)
// 0x75, 0x01, // REPORT_SIZE (1 bit per button)
// 0x95, 0x0D, // REPORT_COUNT (13 bits total)
// 0x81, 0x02, // INPUT (Data,Var,Abs)
// // --- Padding (3 bits) ---
// 0x75, 0x01, // REPORT_SIZE (1)
// 0x95, 0x03, // REPORT_COUNT (3 bits)
// 0x81, 0x03, // INPUT (Const,Var,Abs)
// // --- Encoders (3 x int8_t) ---
// 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
// 0x09, 0x30, // USAGE (X)
// 0x09, 0x31, // USAGE (Y)
// 0x09, 0x32, // USAGE (Z)
// 0x15, 0x81, // LOGICAL_MINIMUM (-127)
// 0x25, 0x7F, // LOGICAL_MAXIMUM (127)
// 0x75, 0x08, // REPORT_SIZE (8 bits)
// 0x95, 0x03, // REPORT_COUNT (3 axes)
// 0x81, 0x02, // INPUT (Data,Var,Abs)
// 0xC0 /* End Collection */
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x06, // Usage (Keyboard)
0xA1, 0x01, // Collection (Application)
// Modifiers (8 bits)
0x05, 0x07, // Usage Page (Keyboard/Keypad)
0x19, 0xE0, // Usage Minimum (224) - Left Control
0x29, 0xE7, // Usage Maximum (231) - Right GUI
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1 bit)
0x95, 0x08, // Report Count (8 bits)
0x81, 0x02, // Input (Data, Variable, Absolute)
// Reserved byte (8 bits)
0x75, 0x08, // Report Size (8 bits)
0x95, 0x01, // Report Count (1)
0x81, 0x01, // Input (Constant)
// Key bitfield (96 bits = 12 bytes)
0x05, 0x07, // Usage Page (Keyboard/Keypad)
0x19, 0x04, // Usage Minimum (4) — 'A' key
0x29, 0x63, // Usage Maximum (99) — 96 keys total (4 to 99)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1 bit)
0x95, 0x60, // Report Count (96 bits)
0x81, 0x02, // Input (Data, Variable, Absolute)
0xC0 // End Collection
};
static uint8_t HIDInEpAdd = HID_EPIN_ADDR;
/**
* @}
*/
/** @defgroup USBD_HID_Private_Functions
* @{
*/
/**
* @brief USBD_HID_Init
* Initialize the HID interface
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t USBD_HID_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
UNUSED(cfgidx);
USBD_HID_HandleTypeDef *hhid;
hhid = (USBD_HID_HandleTypeDef *)USBD_malloc(sizeof(USBD_HID_HandleTypeDef));
if (hhid == NULL)
{
pdev->pClassDataCmsit[pdev->classId] = NULL;
return (uint8_t)USBD_EMEM;
}
pdev->pClassDataCmsit[pdev->classId] = (void *)hhid;
pdev->pClassData = pdev->pClassDataCmsit[pdev->classId];
#ifdef USE_USBD_COMPOSITE
/* Get the Endpoints addresses allocated for this class instance */
HIDInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);
#endif /* USE_USBD_COMPOSITE */
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = HID_HS_BINTERVAL;
}
else /* LOW and FULL-speed endpoints */
{
pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = HID_FS_BINTERVAL;
}
/* Open EP IN */
(void)USBD_LL_OpenEP(pdev, HIDInEpAdd, USBD_EP_TYPE_INTR, HID_EPIN_SIZE);
pdev->ep_in[HIDInEpAdd & 0xFU].is_used = 1U;
hhid->state = USBD_HID_IDLE;
return (uint8_t)USBD_OK;
}
/**
* @brief USBD_HID_DeInit
* DeInitialize the HID layer
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t USBD_HID_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
UNUSED(cfgidx);
#ifdef USE_USBD_COMPOSITE
/* Get the Endpoints addresses allocated for this class instance */
HIDInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, (uint8_t)pdev->classId);
#endif /* USE_USBD_COMPOSITE */
/* Close HID EPs */
(void)USBD_LL_CloseEP(pdev, HIDInEpAdd);
pdev->ep_in[HIDInEpAdd & 0xFU].is_used = 0U;
pdev->ep_in[HIDInEpAdd & 0xFU].bInterval = 0U;
/* Free allocated memory */
if (pdev->pClassDataCmsit[pdev->classId] != NULL)
{
(void)USBD_free(pdev->pClassDataCmsit[pdev->classId]);
pdev->pClassDataCmsit[pdev->classId] = NULL;
}
return (uint8_t)USBD_OK;
}
/**
* @brief USBD_HID_Setup
* Handle the HID specific requests
* @param pdev: instance
* @param req: usb requests
* @retval status
*/
static uint8_t USBD_HID_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
{
USBD_HID_HandleTypeDef *hhid = (USBD_HID_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId];
USBD_StatusTypeDef ret = USBD_OK;
uint16_t len;
uint8_t *pbuf;
uint16_t status_info = 0U;
if (hhid == NULL)
{
return (uint8_t)USBD_FAIL;
}
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
case USB_REQ_TYPE_CLASS :
switch (req->bRequest)
{
case USBD_HID_REQ_SET_PROTOCOL:
hhid->Protocol = (uint8_t)(req->wValue);
break;
case USBD_HID_REQ_GET_PROTOCOL:
(void)USBD_CtlSendData(pdev, (uint8_t *)&hhid->Protocol, 1U);
break;
case USBD_HID_REQ_SET_IDLE:
hhid->IdleState = (uint8_t)(req->wValue >> 8);
break;
case USBD_HID_REQ_GET_IDLE:
(void)USBD_CtlSendData(pdev, (uint8_t *)&hhid->IdleState, 1U);
break;
default:
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
break;
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_STATUS:
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
(void)USBD_CtlSendData(pdev, (uint8_t *)&status_info, 2U);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
case USB_REQ_GET_DESCRIPTOR:
if ((req->wValue >> 8) == HID_REPORT_DESC)
{
len = MIN(HID_MOUSE_REPORT_DESC_SIZE, req->wLength);
pbuf = HID_MOUSE_ReportDesc;
}
else if ((req->wValue >> 8) == HID_DESCRIPTOR_TYPE)
{
pbuf = USBD_HID_Desc;
len = MIN(USB_HID_DESC_SIZ, req->wLength);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
(void)USBD_CtlSendData(pdev, pbuf, len);
break;
case USB_REQ_GET_INTERFACE :
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
(void)USBD_CtlSendData(pdev, (uint8_t *)&hhid->AltSetting, 1U);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
case USB_REQ_SET_INTERFACE:
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
hhid->AltSetting = (uint8_t)(req->wValue);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
case USB_REQ_CLEAR_FEATURE:
break;
default:
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
break;
default:
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
return (uint8_t)ret;
}
/**
* @brief USBD_HID_SendReport
* Send HID Report
* @param pdev: device instance
* @param buff: pointer to report
* @param ClassId: The Class ID
* @retval status
*/
#ifdef USE_USBD_COMPOSITE
uint8_t USBD_HID_SendReport(USBD_HandleTypeDef *pdev, uint8_t *report, uint16_t len, uint8_t ClassId)
{
USBD_HID_HandleTypeDef *hhid = (USBD_HID_HandleTypeDef *)pdev->pClassDataCmsit[ClassId];
#else
uint8_t USBD_HID_SendReport(USBD_HandleTypeDef *pdev, uint8_t *report, uint16_t len)
{
USBD_HID_HandleTypeDef *hhid = (USBD_HID_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId];
#endif /* USE_USBD_COMPOSITE */
if (hhid == NULL)
{
return (uint8_t)USBD_FAIL;
}
#ifdef USE_USBD_COMPOSITE
/* Get the Endpoints addresses allocated for this class instance */
HIDInEpAdd = USBD_CoreGetEPAdd(pdev, USBD_EP_IN, USBD_EP_TYPE_INTR, ClassId);
#endif /* USE_USBD_COMPOSITE */
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
if (hhid->state == USBD_HID_IDLE)
{
hhid->state = USBD_HID_BUSY;
(void)USBD_LL_Transmit(pdev, HIDInEpAdd, report, len);
}
}
return (uint8_t)USBD_OK;
}
/**
* @brief USBD_HID_GetPollingInterval
* return polling interval from endpoint descriptor
* @param pdev: device instance
* @retval polling interval
*/
uint32_t USBD_HID_GetPollingInterval(USBD_HandleTypeDef *pdev)
{
uint32_t polling_interval;
/* HIGH-speed endpoints */
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Sets the data transfer polling interval for high speed transfers.
Values between 1..16 are allowed. Values correspond to interval
of 2 ^ (bInterval-1). This option (8 ms, corresponds to HID_HS_BINTERVAL */
polling_interval = (((1U << (HID_HS_BINTERVAL - 1U))) / 8U);
}
else /* LOW and FULL-speed endpoints */
{
/* Sets the data transfer polling interval for low and full
speed transfers */
polling_interval = HID_FS_BINTERVAL;
}
return ((uint32_t)(polling_interval));
}
#ifndef USE_USBD_COMPOSITE
/**
* @brief USBD_HID_GetCfgFSDesc
* return FS configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_HID_GetFSCfgDesc(uint16_t *length)
{
USBD_EpDescTypeDef *pEpDesc = USBD_GetEpDesc(USBD_HID_CfgDesc, HID_EPIN_ADDR);
if (pEpDesc != NULL)
{
pEpDesc->bInterval = HID_FS_BINTERVAL;
}
*length = (uint16_t)sizeof(USBD_HID_CfgDesc);
return USBD_HID_CfgDesc;
}
/**
* @brief USBD_HID_GetCfgHSDesc
* return HS configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_HID_GetHSCfgDesc(uint16_t *length)
{
USBD_EpDescTypeDef *pEpDesc = USBD_GetEpDesc(USBD_HID_CfgDesc, HID_EPIN_ADDR);
if (pEpDesc != NULL)
{
pEpDesc->bInterval = HID_HS_BINTERVAL;
}
*length = (uint16_t)sizeof(USBD_HID_CfgDesc);
return USBD_HID_CfgDesc;
}
/**
* @brief USBD_HID_GetOtherSpeedCfgDesc
* return other speed configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_HID_GetOtherSpeedCfgDesc(uint16_t *length)
{
USBD_EpDescTypeDef *pEpDesc = USBD_GetEpDesc(USBD_HID_CfgDesc, HID_EPIN_ADDR);
if (pEpDesc != NULL)
{
pEpDesc->bInterval = HID_FS_BINTERVAL;
}
*length = (uint16_t)sizeof(USBD_HID_CfgDesc);
return USBD_HID_CfgDesc;
}
#endif /* USE_USBD_COMPOSITE */
/**
* @brief USBD_HID_DataIn
* handle data IN Stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
static uint8_t USBD_HID_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
UNUSED(epnum);
/* Ensure that the FIFO is empty before a new transfer, this condition could
be caused by a new transfer before the end of the previous transfer */
((USBD_HID_HandleTypeDef *)pdev->pClassDataCmsit[pdev->classId])->state = USBD_HID_IDLE;
return (uint8_t)USBD_OK;
}
#ifndef USE_USBD_COMPOSITE
/**
* @brief DeviceQualifierDescriptor
* return Device Qualifier descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_HID_GetDeviceQualifierDesc(uint16_t *length)
{
*length = (uint16_t)sizeof(USBD_HID_DeviceQualifierDesc);
return USBD_HID_DeviceQualifierDesc;
}
#endif /* USE_USBD_COMPOSITE */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/

82
firmware/mainboard/stmf446retx/Src/stm32f4xx_hal_msp.c Normal file
View File

@@ -0,0 +1,82 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f4xx_hal_msp.c
* @brief This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

232
firmware/mainboard/stmf446retx/Src/stm32f4xx_it.c Normal file
View File

@@ -0,0 +1,232 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32f4xx_it.c
* @brief Interrupt Service Routines.
******************************************************************************
* @attention
*
* Copyright (c) 2025 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stm32f4xx_it.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
extern CAN_HandleTypeDef hcan1;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
/******************************************************************************/
/* Cortex-M4 Processor Interruption and Exception Handlers */
/******************************************************************************/
/**
* @brief This function handles Non maskable interrupt.
*/
void NMI_Handler(void)
{
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
/* USER CODE END NonMaskableInt_IRQn 0 */
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
while (1)
{
}
/* USER CODE END NonMaskableInt_IRQn 1 */
}
/**
* @brief This function handles Hard fault interrupt.
*/
void HardFault_Handler(void)
{
/* USER CODE BEGIN HardFault_IRQn 0 */
/* USER CODE END HardFault_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
/* USER CODE END W1_HardFault_IRQn 0 */
}
}
/**
* @brief This function handles Memory management fault.
*/
void MemManage_Handler(void)
{
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
/* USER CODE END MemoryManagement_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
/* USER CODE END W1_MemoryManagement_IRQn 0 */
}
}
/**
* @brief This function handles Pre-fetch fault, memory access fault.
*/
void BusFault_Handler(void)
{
/* USER CODE BEGIN BusFault_IRQn 0 */
/* USER CODE END BusFault_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
/* USER CODE END W1_BusFault_IRQn 0 */
}
}
/**
* @brief This function handles Undefined instruction or illegal state.
*/
void UsageFault_Handler(void)
{
/* USER CODE BEGIN UsageFault_IRQn 0 */
/* USER CODE END UsageFault_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
/* USER CODE END W1_UsageFault_IRQn 0 */
}
}
/**
* @brief This function handles System service call via SWI instruction.
*/
void SVC_Handler(void)
{
/* USER CODE BEGIN SVCall_IRQn 0 */
/* USER CODE END SVCall_IRQn 0 */
/* USER CODE BEGIN SVCall_IRQn 1 */
/* USER CODE END SVCall_IRQn 1 */
}
/**
* @brief This function handles Debug monitor.
*/
void DebugMon_Handler(void)
{
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
/* USER CODE END DebugMonitor_IRQn 0 */
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
/* USER CODE END DebugMonitor_IRQn 1 */
}
/**
* @brief This function handles Pendable request for system service.
*/
void PendSV_Handler(void)
{
/* USER CODE BEGIN PendSV_IRQn 0 */
/* USER CODE END PendSV_IRQn 0 */
/* USER CODE BEGIN PendSV_IRQn 1 */
/* USER CODE END PendSV_IRQn 1 */
}
/**
* @brief This function handles System tick timer.
*/
void SysTick_Handler(void)
{
/* USER CODE BEGIN SysTick_IRQn 0 */
/* USER CODE END SysTick_IRQn 0 */
HAL_IncTick();
/* USER CODE BEGIN SysTick_IRQn 1 */
/* USER CODE END SysTick_IRQn 1 */
}
/******************************************************************************/
/* STM32F4xx Peripheral Interrupt Handlers */
/* Add here the Interrupt Handlers for the used peripherals. */
/* For the available peripheral interrupt handler names, */
/* please refer to the startup file (startup_stm32f4xx.s). */
/******************************************************************************/
/**
* @brief This function handles CAN1 RX0 interrupt.
*/
void CAN1_RX0_IRQHandler(void)
{
/* USER CODE BEGIN CAN1_RX0_IRQn 0 */
/* USER CODE END CAN1_RX0_IRQn 0 */
HAL_CAN_IRQHandler(&hcan1);
/* USER CODE BEGIN CAN1_RX0_IRQn 1 */
/* USER CODE END CAN1_RX0_IRQn 1 */
}
/**
* @brief This function handles USB On The Go FS global interrupt.
*/
void OTG_FS_IRQHandler(void)
{
/* USER CODE BEGIN OTG_FS_IRQn 0 */
/* USER CODE END OTG_FS_IRQn 0 */
HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
/* USER CODE BEGIN OTG_FS_IRQn 1 */
/* USER CODE END OTG_FS_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

11
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usb_device.c → firmware/mainboard/stmf446retx/Src/usb_device.c
View File

@@ -2,7 +2,7 @@
/**
******************************************************************************
* @file : usb_device.c
* @version : v2.0_Cube
* @version : v1.0_Cube
* @brief : This file implements the USB Device
******************************************************************************
* @attention
@@ -23,8 +23,7 @@
#include "usb_device.h"
#include "usbd_core.h"
#include "usbd_desc.h"
#include "usbd_cdc.h"
#include "usbd_cdc_if.h"
#include "usbd_hid.h"
/* USER CODE BEGIN Includes */
@@ -72,11 +71,7 @@ void MX_USB_DEVICE_Init(void)
{
Error_Handler();
}
if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK)
{
Error_Handler();
}
if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK)
if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_HID) != USBD_OK)
{
Error_Handler();
}

239
firmware/components/CAN/MainCAN/src/USB_DEVICE/Target/usbd_conf.c → firmware/mainboard/stmf446retx/Src/usbd_conf.c
View File

@@ -1,8 +1,8 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : Target/usbd_conf.c
* @version : v2.0_Cube
* @file : usbd_conf.c
* @version : v1.0_Cube
* @brief : This file implements the board support package for the USB device library
******************************************************************************
* @attention
@@ -19,11 +19,12 @@
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
#include "stm32f1xx_hal.h"
#include "stm32f4xx.h"
#include "stm32f4xx_hal.h"
#include "usbd_def.h"
#include "usbd_core.h"
#include "usbd_cdc.h"
#include "usbd_hid.h"
/* USER CODE BEGIN Includes */
@@ -38,28 +39,27 @@
/* USER CODE END PV */
PCD_HandleTypeDef hpcd_USB_FS;
PCD_HandleTypeDef hpcd_USB_OTG_FS;
void Error_Handler(void);
/* External functions --------------------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
/* USER CODE END PFP */
/* Private functions ---------------------------------------------------------*/
static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
#else
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
/*******************************************************************************
LL Driver Callbacks (PCD -> USB Device Library)
@@ -68,45 +68,69 @@ void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
{
if(pcdHandle->Instance==USB)
GPIO_InitTypeDef GPIO_InitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
if(pcdHandle->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_MspInit 0 */
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
/* USER CODE END USB_OTG_FS_MspInit 0 */
/** Initializes the peripherals clock
*/
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
{
Error_Handler();
}
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USB_OTG_FS GPIO Configuration
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE END USB_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USB_CLK_ENABLE();
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
/* Peripheral interrupt init */
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
/* USER CODE BEGIN USB_MspInit 1 */
HAL_NVIC_SetPriority(OTG_FS_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
/* USER CODE END USB_MspInit 1 */
/* USER CODE END USB_OTG_FS_MspInit 1 */
}
}
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
{
if(pcdHandle->Instance==USB)
if(pcdHandle->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_MspDeInit 0 */
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
/* USER CODE END USB_MspDeInit 0 */
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USB_CLK_DISABLE();
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
/**USB_OTG_FS GPIO Configuration
PA11 ------> USB_OTG_FS_DM
PA12 ------> USB_OTG_FS_DP
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
/* Peripheral interrupt Deinit*/
/* USER CODE BEGIN USB:USB_LP_CAN1_RX0_IRQn disable */
/**
* Uncomment the line below to disable the "USB_LP_CAN1_RX0_IRQn" interrupt
* Be aware, disabling shared interrupt may affect other IPs
*/
/* HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); */
/* USER CODE END USB:USB_LP_CAN1_RX0_IRQn disable */
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_MspDeInit 1 */
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
/* USER CODE END USB_MspDeInit 1 */
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
}
}
@@ -181,7 +205,15 @@ void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
{
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
if ( hpcd->Init.speed != PCD_SPEED_FULL)
if ( hpcd->Init.speed == PCD_SPEED_HIGH)
{
speed = USBD_SPEED_HIGH;
}
else if ( hpcd->Init.speed == PCD_SPEED_FULL)
{
speed = USBD_SPEED_FULL;
}
else
{
Error_Handler();
}
@@ -206,6 +238,7 @@ void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
{
/* Inform USB library that core enters in suspend Mode. */
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
__HAL_PCD_GATE_PHYCLOCK(hpcd);
/* Enter in STOP mode. */
/* USER CODE BEGIN 2 */
if (hpcd->Init.low_power_enable)
@@ -304,45 +337,45 @@ void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
{
/* Init USB Ip. */
if (pdev->id == DEVICE_FS) {
/* Link the driver to the stack. */
hpcd_USB_FS.pData = pdev;
pdev->pData = &hpcd_USB_FS;
hpcd_USB_OTG_FS.pData = pdev;
pdev->pData = &hpcd_USB_OTG_FS;
hpcd_USB_FS.Instance = USB;
hpcd_USB_FS.Init.dev_endpoints = 8;
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
hpcd_USB_FS.Init.low_power_enable = DISABLE;
hpcd_USB_FS.Init.lpm_enable = DISABLE;
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
hpcd_USB_OTG_FS.Init.dev_endpoints = 6;
hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
hpcd_USB_OTG_FS.Init.dma_enable = DISABLE;
hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE;
hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
{
Error_Handler( );
}
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
/* Register USB PCD CallBacks */
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_FS, PCD_DataOutStageCallback);
HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback);
HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback);
HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback);
HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_OTG_FS, PCD_DataOutStageCallback);
HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_OTG_FS, PCD_DataInStageCallback);
HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_OTG_FS, PCD_ISOOUTIncompleteCallback);
HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_OTG_FS, PCD_ISOINIncompleteCallback);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
/* USER CODE BEGIN EndPoint_Configuration */
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
/* USER CODE END EndPoint_Configuration */
/* USER CODE BEGIN EndPoint_Configuration_CDC */
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
/* USER CODE END EndPoint_Configuration_CDC */
HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x80);
}
return USBD_OK;
}
@@ -535,7 +568,7 @@ USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_a
* @param size: Data size
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
@@ -555,7 +588,7 @@ USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, u
* @param size: Data size
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
@@ -579,15 +612,57 @@ uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
}
/**
* @brief Delays routine for the USB device library.
* @param Delay: Delay in ms
* @brief Send LPM message to user layer
* @param hpcd: PCD handle
* @param msg: LPM message
* @retval None
*/
void USBD_LL_Delay(uint32_t Delay)
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
{
HAL_Delay(Delay);
switch (msg)
{
case PCD_LPM_L0_ACTIVE:
if (hpcd->Init.low_power_enable)
{
SystemClock_Config();
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
}
__HAL_PCD_UNGATE_PHYCLOCK(hpcd);
USBD_LL_Resume(hpcd->pData);
break;
case PCD_LPM_L1_ACTIVE:
__HAL_PCD_GATE_PHYCLOCK(hpcd);
USBD_LL_Suspend(hpcd->pData);
/* Enter in STOP mode. */
if (hpcd->Init.low_power_enable)
{
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
}
break;
}
}
#ifdef USBD_HS_TESTMODE_ENABLE
/**
* @brief Set High speed Test mode.
* @param pdev: Device handle
* @param testmode: test mode
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_LL_SetTestMode(USBD_HandleTypeDef *pdev, uint8_t testmode)
{
UNUSED(pdev);
UNUSED(testmode);
return USBD_OK;
}
#endif /* USBD_HS_TESTMODE_ENABLE */
/**
* @brief Static single allocation.
* @param size: Size of allocated memory
@@ -595,7 +670,7 @@ void USBD_LL_Delay(uint32_t Delay)
*/
void *USBD_static_malloc(uint32_t size)
{
static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
static uint32_t mem[(sizeof(USBD_HID_HandleTypeDef)/4)+1];/* On 32-bit boundary */
return mem;
}
@@ -610,29 +685,13 @@ void USBD_static_free(void *p)
}
/**
* @brief Software Device Connection
* @param hpcd: PCD handle
* @param state: Connection state (0: disconnected / 1: connected)
* @brief Delays routine for the USB Device Library.
* @param Delay: Delay in ms
* @retval None
*/
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
static void PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
#else
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
void USBD_LL_Delay(uint32_t Delay)
{
/* USER CODE BEGIN 6 */
if (state == 1)
{
/* Configure Low connection state. */
}
else
{
/* Configure High connection state. */
}
/* USER CODE END 6 */
HAL_Delay(Delay);
}
/**

71
firmware/components/CAN/MainCAN/src/USB_DEVICE/App/usbd_desc.c → firmware/mainboard/stmf446retx/Src/usbd_desc.c
View File

@@ -1,8 +1,8 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : App/usbd_desc.c
* @version : v2.0_Cube
* @file : usbd_desc.c
* @version : v1.0_Cube
* @brief : This file implements the USB device descriptors.
******************************************************************************
* @attention
@@ -62,13 +62,15 @@
* @{
*/
#define USBD_VID 1155
#define USBD_VID 0xCAFE
#define USBD_LANGID_STRING 1033
#define USBD_MANUFACTURER_STRING "STMicroelectronics"
#define USBD_PID_FS 22336
#define USBD_PRODUCT_STRING_FS "Modular Keyboard - Main Board"
#define USBD_CONFIGURATION_STRING_FS "CDC Config"
#define USBD_INTERFACE_STRING_FS "CDC Interface"
#define USBD_MANUFACTURER_STRING "TeamSKBD"
#define USBD_PID_FS 22315
#define USBD_PRODUCT_STRING_FS "MSKBD Mainboard"
#define USBD_CONFIGURATION_STRING_FS "HID Config"
#define USBD_INTERFACE_STRING_FS "HID Interface"
#define USB_SIZ_BOS_DESC 0x0C
/* USER CODE BEGIN PRIVATE_DEFINES */
@@ -119,6 +121,9 @@ uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length
uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
#if (USBD_LPM_ENABLED == 1)
uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
#endif /* (USBD_LPM_ENABLED == 1) */
/**
* @}
@@ -138,6 +143,9 @@ USBD_DescriptorsTypeDef FS_Desc =
, USBD_FS_SerialStrDescriptor
, USBD_FS_ConfigStrDescriptor
, USBD_FS_InterfaceStrDescriptor
#if (USBD_LPM_ENABLED == 1)
, USBD_FS_USR_BOSDescriptor
#endif /* (USBD_LPM_ENABLED == 1) */
};
#if defined ( __ICCARM__ ) /* IAR Compiler */
@@ -148,10 +156,16 @@ __ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
{
0x12, /*bLength */
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
#if (USBD_LPM_ENABLED == 1)
0x01, /*bcdUSB */ /* changed to USB version 2.01
in order to support LPM L1 suspend
resume test of USBCV3.0*/
#else
0x00, /*bcdUSB */
#endif /* (USBD_LPM_ENABLED == 1) */
0x02,
0x02, /*bDeviceClass*/
0x02, /*bDeviceSubClass*/
0x00, /*bDeviceClass*/
0x00, /*bDeviceSubClass*/
0x00, /*bDeviceProtocol*/
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
LOBYTE(USBD_VID), /*idVendor*/
@@ -167,6 +181,28 @@ __ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
};
/* USB_DeviceDescriptor */
/** BOS descriptor. */
#if (USBD_LPM_ENABLED == 1)
#if defined ( __ICCARM__ ) /* IAR Compiler */
#pragma data_alignment=4
#endif /* defined ( __ICCARM__ ) */
__ALIGN_BEGIN uint8_t USBD_FS_BOSDesc[USB_SIZ_BOS_DESC] __ALIGN_END =
{
0x5,
USB_DESC_TYPE_BOS,
0xC,
0x0,
0x1, /* 1 device capability*/
/* device capability*/
0x7,
USB_DEVICE_CAPABITY_TYPE,
0x2,
0x2, /* LPM capability bit set*/
0x0,
0x0,
0x0
};
#endif /* (USBD_LPM_ENABLED == 1) */
/**
* @}
@@ -329,6 +365,21 @@ uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *leng
return USBD_StrDesc;
}
#if (USBD_LPM_ENABLED == 1)
/**
* @brief Return the BOS descriptor
* @param speed : Current device speed
* @param length : Pointer to data length variable
* @retval Pointer to descriptor buffer
*/
uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
{
UNUSED(speed);
*length = sizeof(USBD_FS_BOSDesc);
return (uint8_t*)USBD_FS_BOSDesc;
}
#endif /* (USBD_LPM_ENABLED == 1) */
/**
* @brief Create the serial number string descriptor
* @param None

46
firmware/mainboard/stmf446retx/lib/README Normal file
View File

@@ -0,0 +1,46 @@
This directory is intended for project specific (private) libraries.
PlatformIO will compile them to static libraries and link into the executable file.
The source code of each library should be placed in a separate directory
("lib/your_library_name/[Code]").
For example, see the structure of the following example libraries `Foo` and `Bar`:
|--lib
| |
| |--Bar
| | |--docs
| | |--examples
| | |--src
| | |- Bar.c
| | |- Bar.h
| | |- library.json (optional. for custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
| |
| |--Foo
| | |- Foo.c
| | |- Foo.h
| |
| |- README --> THIS FILE
|
|- platformio.ini
|--src
|- main.c
Example contents of `src/main.c` using Foo and Bar:
```
#include <Foo.h>
#include <Bar.h>
int main (void)
{
...
}
```
The PlatformIO Library Dependency Finder will find automatically dependent
libraries by scanning project source files.
More information about PlatformIO Library Dependency Finder
- https://docs.platformio.org/page/librarymanager/ldf.html

172
firmware/mainboard/stmf446retx/mainboard-stmf446re.ioc Normal file
View File

@@ -0,0 +1,172 @@
#MicroXplorer Configuration settings - do not modify
CAD.formats=
CAD.pinconfig=
CAD.provider=
CAN1.BS1=CAN_BS1_16TQ
CAN1.BS2=CAN_BS2_7TQ
CAN1.CalculateBaudRate=249999
CAN1.CalculateTimeBit=4000
CAN1.CalculateTimeQuantum=166.66666666666669
CAN1.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,Prescaler,BS1,BS2
CAN1.Prescaler=6
File.Version=6
GPIO.groupedBy=Group By Peripherals
KeepUserPlacement=false
Mcu.CPN=STM32F446RET6
Mcu.Family=STM32F4
Mcu.IP0=CAN1
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IP4=USB_DEVICE
Mcu.IP5=USB_OTG_FS
Mcu.IPNb=6
Mcu.Name=STM32F446R(C-E)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PH0-OSC_IN
Mcu.Pin1=PH1-OSC_OUT
Mcu.Pin10=PB8
Mcu.Pin11=PB9
Mcu.Pin12=VP_SYS_VS_Systick
Mcu.Pin13=VP_USB_DEVICE_VS_USB_DEVICE_HID_FS
Mcu.Pin2=PB13
Mcu.Pin3=PB14
Mcu.Pin4=PB15
Mcu.Pin5=PC6
Mcu.Pin6=PA11
Mcu.Pin7=PA12
Mcu.Pin8=PA13
Mcu.Pin9=PA14
Mcu.PinsNb=14
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F446RETx
MxCube.Version=6.13.0
MxDb.Version=DB.6.0.130
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
PA11.Mode=Device_Only
PA11.Signal=USB_OTG_FS_DM
PA12.Mode=Device_Only
PA12.Signal=USB_OTG_FS_DP
PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Serial_Wire
PA14.Signal=SYS_JTCK-SWCLK
PB13.Locked=true
PB13.Signal=GPIO_Output
PB14.Locked=true
PB14.Signal=GPIO_Output
PB15.Locked=true
PB15.Signal=GPIO_Input
PB8.Mode=CAN_Activate
PB8.Signal=CAN1_RX
PB9.Mode=CAN_Activate
PB9.Signal=CAN1_TX
PC6.Locked=true
PC6.Signal=GPIO_Input
PH0-OSC_IN.Mode=HSE-External-Oscillator
PH0-OSC_IN.Signal=RCC_OSC_IN
PH1-OSC_OUT.Mode=HSE-External-Oscillator
PH1-OSC_OUT.Signal=RCC_OSC_OUT
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32F446RETx
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.28.2
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=1
ProjectManager.MainLocation=Core/Src
ProjectManager.NoMain=true
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=mainboard-stmf446re.ioc
ProjectManager.ProjectName=mainboard-stmf446re
ProjectManager.ProjectStructure=
ProjectManager.RegisterCallBack=
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=CMake
ProjectManager.ToolChainLocation=
ProjectManager.UAScriptAfterPath=
ProjectManager.UAScriptBeforePath=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_CAN1_Init-CAN1-false-HAL-true,4-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false
RCC.AHBFreq_Value=72000000
RCC.APB1CLKDivider=RCC_HCLK_DIV2
RCC.APB1Freq_Value=36000000
RCC.APB1TimFreq_Value=72000000
RCC.APB2Freq_Value=72000000
RCC.APB2TimFreq_Value=72000000
RCC.CECFreq_Value=32786.88524590164
RCC.CortexFreq_Value=72000000
RCC.FCLKCortexFreq_Value=72000000
RCC.FMPI2C1Freq_Value=36000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=72000000
RCC.HSE_VALUE=8000000
RCC.I2S1Freq_Value=48000000
RCC.I2S2Freq_Value=48000000
RCC.IPParameters=AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FMPI2C1Freq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,I2S1Freq_Value,I2S2Freq_Value,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SoutputFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLRCLKFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIoutputFreq_Value,PWRFreq_Value,SAIAFreq_Value,SAIBFreq_Value,SDIOFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USBFreq_Value,VCOI2SInputFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAIInputFreq_Value,VCOSAIOutputFreq_Value
RCC.MCO2PinFreq_Value=72000000
RCC.PLLCLKFreq_Value=72000000
RCC.PLLI2SPCLKFreq_Value=48000000
RCC.PLLI2SQCLKFreq_Value=48000000
RCC.PLLI2SRCLKFreq_Value=48000000
RCC.PLLI2SoutputFreq_Value=48000000
RCC.PLLM=4
RCC.PLLN=72
RCC.PLLQ=3
RCC.PLLQCLKFreq_Value=48000000
RCC.PLLRCLKFreq_Value=72000000
RCC.PLLSAIPCLKFreq_Value=48000000
RCC.PLLSAIQCLKFreq_Value=48000000
RCC.PLLSAIoutputFreq_Value=48000000
RCC.PWRFreq_Value=72000000
RCC.SAIAFreq_Value=48000000
RCC.SAIBFreq_Value=48000000
RCC.SDIOFreq_Value=48000000
RCC.SPDIFRXFreq_Value=72000000
RCC.SYSCLKFreq_VALUE=72000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.USBFreq_Value=48000000
RCC.VCOI2SInputFreq_Value=500000
RCC.VCOI2SOutputFreq_Value=96000000
RCC.VCOInputFreq_Value=2000000
RCC.VCOOutputFreq_Value=144000000
RCC.VCOSAIInputFreq_Value=500000
RCC.VCOSAIOutputFreq_Value=96000000
USB_DEVICE.CLASS_NAME_FS=HID
USB_DEVICE.IPParameters=VirtualMode-HID_FS,VirtualModeFS,CLASS_NAME_FS,VID-HID_FS,MANUFACTURER_STRING-HID_FS,PRODUCT_STRING_HID_FS
USB_DEVICE.MANUFACTURER_STRING-HID_FS=TeamSKBD
USB_DEVICE.PRODUCT_STRING_HID_FS=MSKBD Mainboard
USB_DEVICE.VID-HID_FS=0xCAFE
USB_DEVICE.VirtualMode-HID_FS=Hid
USB_DEVICE.VirtualModeFS=Hid_FS
USB_OTG_FS.IPParameters=VirtualMode
USB_OTG_FS.VirtualMode=Device_Only
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_USB_DEVICE_VS_USB_DEVICE_HID_FS.Mode=HID_FS
VP_USB_DEVICE_VS_USB_DEVICE_HID_FS.Signal=USB_DEVICE_VS_USB_DEVICE_HID_FS
board=custom

19
firmware/mainboard/stmf446retx/platformio.ini Normal file
View File

@@ -0,0 +1,19 @@
; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env:nucleo_f446re]
platform = ststm32
board = nucleo_f446re
framework = stm32cube
board_build.stm32cube.custom_config_header = yes
[platformio]
include_dir = Inc
src_dir = Src

19
firmware/mainboard/stmf446retx/stm32pio.ini Normal file
View File

@@ -0,0 +1,19 @@
[app]
platformio_cmd = platformio
cubemx_cmd = /opt/stm32cubemx/STM32CubeMX
java_cmd = java
[project]
cubemx_script_content = config load ${ioc_file_absolute_path}
generate code ${project_dir_absolute_path}
exit
platformio_ini_patch_content = [platformio]
include_dir = Inc
src_dir = Src
board = nucleo_f446re
ioc_file = mainboard-stmf446re.ioc
cleanup_ignore = mainboard-stmf446re.ioc
cleanup_use_git = False
inspect_ioc = True
last_error =

11
firmware/mainboard/stmf446retx/test/README Normal file
View File

@@ -0,0 +1,11 @@
This directory is intended for PlatformIO Test Runner and project tests.
Unit Testing is a software testing method by which individual units of
source code, sets of one or more MCU program modules together with associated
control data, usage procedures, and operating procedures, are tested to
determine whether they are fit for use. Unit testing finds problems early
in the development cycle.
More information about PlatformIO Unit Testing:
- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/.sconsign313.dblite Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkCMSISDevice/gcc/startup_stm32f446xx.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkCMSISDevice/system_stm32f4xx.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_adc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_adc_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_can.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_cec.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_cortex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_crc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_cryp.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_cryp_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dac.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dac_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dcmi.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dcmi_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dfsdm.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dma.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dma2d.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dma_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_dsi.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_eth.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_exti.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_flash.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_flash_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_flash_ramfunc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_fmpi2c.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_fmpi2c_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_fmpsmbus.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_fmpsmbus_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_gpio.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_hash.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_hash_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_hcd.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_i2c.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_i2c_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_i2s.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_i2s_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_irda.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_iwdg.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_lptim.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_ltdc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_ltdc_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_mmc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_nand.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_nor.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_pccard.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_pcd.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_pcd_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_pwr.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_pwr_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_qspi.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_rcc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_rcc_ex.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_rng.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_rtc.o Normal file
View File

Binary file not shown.

BIN
firmware/modules/iidx/.pio/build/nucleo_f446re/FrameworkHALDriver/Src/stm32f4xx_hal_rtc_ex.o Normal file
View File

Binary file not shown.

Some files were not shown because too many files have changed in this diff Show More