nkro support :)
This commit is contained in:
135
firmware/components/CAN/CAN-B/Src/can.c
Normal file
135
firmware/components/CAN/CAN-B/Src/can.c
Normal file
@@ -0,0 +1,135 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file can.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the CAN instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "can.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan;
|
||||
|
||||
/* CAN init function */
|
||||
void MX_CAN_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN CAN_Init 0 */
|
||||
|
||||
/* USER CODE END CAN_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN CAN_Init 1 */
|
||||
|
||||
/* USER CODE END CAN_Init 1 */
|
||||
hcan.Instance = CAN1;
|
||||
hcan.Init.Prescaler = 15;
|
||||
hcan.Init.Mode = CAN_MODE_NORMAL;
|
||||
hcan.Init.SyncJumpWidth = CAN_SJW_1TQ;
|
||||
hcan.Init.TimeSeg1 = CAN_BS1_1TQ;
|
||||
hcan.Init.TimeSeg2 = CAN_BS2_1TQ;
|
||||
hcan.Init.TimeTriggeredMode = DISABLE;
|
||||
hcan.Init.AutoBusOff = DISABLE;
|
||||
hcan.Init.AutoWakeUp = DISABLE;
|
||||
hcan.Init.AutoRetransmission = DISABLE;
|
||||
hcan.Init.ReceiveFifoLocked = DISABLE;
|
||||
hcan.Init.TransmitFifoPriority = DISABLE;
|
||||
if (HAL_CAN_Init(&hcan) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN CAN_Init 2 */
|
||||
CAN_FilterTypeDef canfilterconf;
|
||||
canfilterconf.FilterActivation = CAN_FILTER_ENABLE;
|
||||
canfilterconf.FilterBank = 18;
|
||||
canfilterconf.FilterFIFOAssignment = CAN_FILTER_FIFO1;
|
||||
canfilterconf.FilterIdHigh = 0x399 << 5;
|
||||
canfilterconf.FilterIdLow = 0x0000;
|
||||
canfilterconf.FilterMaskIdHigh = 0x7FF << 5;
|
||||
canfilterconf.FilterMaskIdLow = 0x0000;
|
||||
canfilterconf.FilterMode = CAN_FILTERMODE_IDMASK;
|
||||
canfilterconf.FilterScale = CAN_FILTERSCALE_32BIT;
|
||||
HAL_CAN_ConfigFilter(&hcan, &canfilterconf);
|
||||
/* USER CODE END CAN_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 0 */
|
||||
/* CAN1 clock enable */
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**CAN GPIO Configuration
|
||||
PA11 ------> CAN_RX
|
||||
PA12 ------> CAN_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* CAN1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(CAN1_RX1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN1_RX1_IRQn);
|
||||
/* USER CODE BEGIN CAN1_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
|
||||
/**CAN GPIO Configuration
|
||||
PA11 ------> CAN_RX
|
||||
PA12 ------> CAN_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
||||
|
||||
/* CAN1 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(CAN1_RX1_IRQn);
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
72
firmware/components/CAN/CAN-B/Src/gpio.c
Normal file
72
firmware/components/CAN/CAN-B/Src/gpio.c
Normal file
@@ -0,0 +1,72 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of all used GPIO pins.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure GPIO */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin : PC13 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PA10 (Input with Pull-Down) */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
225
firmware/components/CAN/CAN-B/Src/main.c
Normal file
225
firmware/components/CAN/CAN-B/Src/main.c
Normal file
@@ -0,0 +1,225 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "can.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
CAN_TxHeaderTypeDef TxHeader;
|
||||
CAN_RxHeaderTypeDef RxHeader;
|
||||
|
||||
uint8_t TxData[8];
|
||||
uint8_t RxData[8];
|
||||
|
||||
uint32_t TxMailbox;
|
||||
|
||||
uint8_t isValidData;
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_CAN_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
HAL_CAN_Start(&hcan);
|
||||
HAL_CAN_ActivateNotification(&hcan, CAN_IT_RX_FIFO1_MSG_PENDING);
|
||||
|
||||
TxHeader.DLC = 2;
|
||||
TxHeader.IDE = CAN_ID_STD;
|
||||
TxHeader.RTR = CAN_RTR_DATA;
|
||||
TxHeader.StdId = 0x399;
|
||||
|
||||
TxData[0] = 100;
|
||||
TxData[1] = 255;
|
||||
|
||||
int GPIOSTATUS = 0;
|
||||
int oldGPIOSTATUS = 0;
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
GPIOSTATUS = HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_10);
|
||||
if(GPIOSTATUS && !oldGPIOSTATUS){
|
||||
HAL_Delay(20);
|
||||
HAL_CAN_AddTxMessage(&hcan, &TxHeader, TxData, &TxMailbox);
|
||||
}
|
||||
oldGPIOSTATUS = GPIOSTATUS;
|
||||
|
||||
if(isValidData){
|
||||
isValidData = 0;
|
||||
for(int i = 0; i < RxData[0]; i++){
|
||||
HAL_GPIO_TogglePin(GPIOC, GPIO_PIN_13);
|
||||
HAL_Delay(RxData[1]);
|
||||
}
|
||||
}
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan){
|
||||
if (HAL_CAN_GetRxMessage(hcan, CAN_RX_FIFO1, &RxHeader, RxData) != HAL_OK) {
|
||||
return;
|
||||
};
|
||||
if(RxHeader.DLC == 2){
|
||||
isValidData = 1;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
86
firmware/components/CAN/CAN-B/Src/stm32f1xx_hal_msp.c
Normal file
86
firmware/components/CAN/CAN-B/Src/stm32f1xx_hal_msp.c
Normal file
@@ -0,0 +1,86 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_msp.c
|
||||
* @brief This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_AFIO_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||
*/
|
||||
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
217
firmware/components/CAN/CAN-B/Src/stm32f1xx_it.c
Normal file
217
firmware/components/CAN/CAN-B/Src/stm32f1xx_it.c
Normal file
@@ -0,0 +1,217 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f1xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern CAN_HandleTypeDef hcan;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M3 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Prefetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F1xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f1xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN RX1 interrupt.
|
||||
*/
|
||||
void CAN1_RX1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_RX1_IRQn 0 */
|
||||
|
||||
/* USER CODE END CAN1_RX1_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan);
|
||||
/* USER CODE BEGIN CAN1_RX1_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN1_RX1_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
Reference in New Issue
Block a user